21/07/2023 00:56:56

Bezel - Rear View Mirror (Remove and Replace)

Correction code 15050212 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 2023-07-20: Added a video in Install part.

Remove

  1. Carefully remove the bezel from the rear mirror assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Take care not to scratch the rear rear mirror.

Install

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
  1. Install the new bezel back to the rear view mirror.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the bezel is mounted properly.