H-Decor Trim - Center Console (2.0) (Remove and Replace)
Correction code
15193612
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the inductive charger module. See Module - Inductive Charger - Center Console (2.0) (Remove and Replace).
-
Remove the H-decor trim from
the inductive charger module.
Install
-
Install the H-decor trim to
the inductive charger module.
- Install the inductive charger module. See Module - Inductive Charger - Center Console (2.0) (Remove and Replace).