20/07/2023 02:01:35

Quad Camera Cover - Lower (Remove and Replace)

Correction code 15050902 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 2023-07-20: Added a video in Remove part.

Remove

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
  1. Use a trim tool to remove the lower quad camera cover.
  2. Remove the tether from the lower quad camera cover, and then remove the lower quad camera cover.

Install

Installation procedure is the reverse of removal.