04/09/2024 17:09:56

Wheel Arch Liner - Rear - LH (Remove and Replace)

Correction code 12011102 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 1133569-00-A Pliers, Clip Removal

    Remove

    1. Remove the LH rear wheel. See Wheel Assembly (Remove and Install).
    2. Remove the bolt and release the clips (x16) that attach the LH rear wheel arch liner to the vehicle, and then remove the liner from the vehicle
      5 Nm (3.7 lbs-ft)

    Install

    Installation procedure is the reverse of removal.