21/11/2018 11:47:01
Hose - Heat Exchanger to Superbottle - Front Drive Unit (Remove and Replace)
Correction code 18303122 2.52 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the superbottle. See Superbottle (Dual Motor) (Remove and Replace).
Install
Installation procedure is the reverse of removal.
CAUTION
Perform a push-pull test to verify that the hose is fully seated.