Light - Trunk (Remove and Replace)
Correction code
17354202
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
Remove
- Open the trunk.
-
Gently pry the trunk light
downward to release the clips (x4).
- Disconnect the electrical connector from the trunk light, and then remove the trunk light from the vehicle.
Install
- Connect the trunk light electrical connector.
-
Gently push in the trunk
light into the LH trunk side trim.
- Close the trunk.