Torque Specifications - Body

Table 1. Torque Specifications: Bracket - Fascia Center To Fender - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH front fascia center bracket to the vehicle	3 Nm (2.2 lbs-ft)	Torx T20 socket	Reuse

Table 2. Torque Specifications: Check Strap - Door - Front - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the check strap to the A-pillar	24 Nm (17.7 lbs-ft)	13 mm socket	Reuse
Nuts that attach the check strap to the door	10 Nm (7.4 lbs-ft)	10 mm socket	Reuse

Table 3. Torque Specifications: Door - Front - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH front door to the hinge	24 Nm (17.7 lbs-ft)	13 mm socket	Reuse

Table 4. Torque Specifications: Fascia - Front (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the top of the front fascia to the vehicle	4 Nm (2.9 lbs-ft)	10 mm socket	Reuse
Bolts that attach the LH side of the front fascia to the fender	4 Nm (2.9 lbs-ft)	10 mm deep socket	Reuse
Bolt that attaches the LH corner of the front fascia to the fender	3 Nm (2.2 lbs-ft)	10 mm deep socket	Reuse
Bolt that attaches the front aero shield to the front valance	5 Nm (3.7 lbs-ft)	10 mm socket	Reuse

Table 5. Torque Specifications: Fascia - Rear (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the corner of the rear fascia to the body	4 Nm (2.9 lbs-ft)	10 mm hex	Reuse
Bolt that attaches the fascia to the rear quarter panel	2 Nm (1.5 lbs-ft)	Torx T25 socket	Reuse
Bolts that attach the rear portion of the mid aero shield	5 Nm (3.7 lbs-ft)	10 mm hex	Reuse
Bolts that attach the rear diffuser to the body	4 Nm (2.9 lbs-ft)	10 mm hex	Reuse

Table 6. Torque Specifications: Fender Support - Front - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH front fender support to the front end carrier	16 Nm (11.8 lbs-ft)	13 mm socket	Reuse
Bolt that attaches the LH front fender support to the front fender assembly	9.8 Nm (7.2 lbs-ft)	10 mm socket	Reuse
Bolts (x3) that attach the LH front fender support to the vehicle	35 Nm (25.8 lbs-ft)	10 mm socket	Reuse

Table 7. Torque Specifications: /GUID-41B84B18-0478-4077-BE39-20D9E0BEB0FD.html/GUID-6CEA9BB1-1B7B-45B0-A8E5-FC0583A892AB.html
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the GPS antenna to the bracket	1 Nm (.7 lbs-ft)	Torx T10 bit Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only)	Reuse
Screws (x4) that attach the triple camera to the windshield bracket	1 Nm (.7 lbs-ft)	Torx T10 blade attachment Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only)	Replace	1919198-00-A
Screws (x2) that attach the temperature and humidity sensor to the windshield bracket	0.12 Nm (1 lbs-in)	PH00 Philips Screwdriver Wiha Torque Vario-S 0.10Nm - 0.6Nm	Reuse

Table 8. Torque Specifications: Fascia - Rear - Lower (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the lower rear fascia to the upper rear fascia	3 Nm (2.2 lbs-ft)	10 mm socket	Reuse

Table 9. Torque Specifications: Fascia - Rear - Upper (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the rear diffuser to the inner rear fascia	3 Nm (2.2 lbs-ft)	10 mm socket	Reuse
Bolts that attach the lower rear fascia to the upper rear fascia	3 Nm (2.2 lbs-ft)	10 mm socket	Reuse

Table 10. Torque Specifications: Grille - Fascia - Front (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the front fascia grille to the front fascia	1.8 Nm (1.3 lbs-ft)	Torx T25 socket	Reuse

Table 11. Torque Specifications: Bracket - Rear - Center (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the rear center bracket to the body	4 Nm (2.9 lbs-ft)	10 mm socket	Reuse

Table 12. Torque Specifications: Bumper Beam - Rear (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the rear bumper beam to the body	60 Nm (44.2 lbs-ft)	15 mm deep socket	Reuse

Table 13. Torque Specifications: Bumper Beam - Front (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the front bumper beam to the crush cans	75 Nm (55.3 lbs-ft)	15 mm socket	Replace

Table 14. Torque Specifications: Trunk (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the trunk electrical harness ground straps to the trunk lid	8 Nm (5.9 lbs-ft)	10 mm socket	Reuse/Replace	Self tapping tri-lobular bolt (1128269-00-A): Replace Normal bolt (1447438-00-A): Reuse
Bolts (x4) that attach the trunk lid to the trunk hinges	24 Nm (17.7 lbs-ft)	13 mm socket	Reuse

Table 15. Torque Specifications: GUID-59DDE666-A376-4B96-9909-8CAA6B24F598.html
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x4) that attach the upper leg support to the front end carrier	8 Nm (5.9 lbs-ft)	10 mm deep socket	Reuse