Torque Specifications - Exterior Fittings

Table 1. Torque Specifications: Panel - Aero Shield - Mid (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the mid aero shield panel to the vehicle	5.5 Nm (4.1 lbs-ft)	10 mm socket 4 in extension Ratchet/torque wrench	Reuse	Note Apply threadlocker to the threads of each bolt prior to installation.

Table 2. Torque Specifications: Panel - Aero Shield - Front (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Aero shield panel to body nuts	5.5 Nm (4.1 lbs-ft)	15 mm socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Reuse
Aero shield panel to body bolts	5.5 Nm (4.1 lbs-ft)	10 mm socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Reuse

Table 3. Torque Specifications: Panel - Aero Shield - Front (Structural Pack) (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Aero shield panel to body nuts	8 Nm (5.9 lbs-ft)	15 mm socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Reuse
Aero shield panel to body bolts	6 Nm (4.4 lbs-ft)	10 mm socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Reuse

Table 4. Torque Specifications: Brightwork - Upper - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the brightwork to the body	1 Nm (.7 lbs-ft)	Torx T20 socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Reuse

Table 5. Torque Specifications: Diffuser - Rear Fascia (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the rear fascia diffuser to the vehicle	4 Nm (2.9 lbs-ft)	10 mm socket 2 in extension	Reuse
Bolts that attach the rear fascia diffuser to the outer edge of the rear fascia	3 Nm (2.2 lbs-ft)	10 mm socket	Reuse
Bolts that attach the rear fascia diffuser to the inside of the rear fascia	3 Nm (2.2 lbs-ft)	10 mm socket	Reuse

Table 6. Torque Specifications: ECU – Trailer Hitch (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Trailer hitch ECU to trailer hitch assembly stud	6 Nm (4.4 lbs-ft)	10 mm deep socket ¼ in std ratchet ¼ in torque wrench (installation only)	Reuse

Table 7. Torque Specifications: Jumper Harness - Trailer Hitch (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Trailer hitch jumper harness to bracket on trailer hitch assembly.	2.5 Nm (1.8 lbs-ft)	T25 socket 8 mm wrench	Reuse	Install bolts from bottom of the jumper harness

Table 8. Torque Specifications: GUID-689E731C-0DFA-4CB9-B33C-514D34914F4D.html
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH lower rocker carrier to the body	5 Nm (3.7 lbs-ft)	10 mm socket 4 in extension	Reuse

Table 9. Torque Specifications: Cover - Rocker Panel - Lower - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH lower rocker panel cover to the body	5 Nm (3.7 lbs-ft)	10 mm socket 6 in extension	Reuse

Table 10. Torque Specifications: Assembly - Trailer Hitch (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Trailer hitch assembly to body studs	60 Nm (44.2 lbs-ft)	15 mm, 6-point deep socket 3/8 in ratchet	Reuse

Table 11. Torque Specifications: Mirror - Door - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH door mirror to the door	15 Nm (11.1 lbs-ft)	10 mm socket 4 in extension	Reuse

Table 12. Torque Specifications: Wheel Arch Liner - Front - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH front wheel arch liner to the vehicle	5 Nm (3.7 lbs-ft)	10 mm socket 4 in extension	Reuse