05/03/2020 14:49:11

Raise Vehicle - 4 Post Lift

Correction code 10000405 0.10 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Raise

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
To reduce the risk of personal injury, use appropriate equipment while performing this operation.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Do not work on an incorrectly supported vehicle.
  1. Disconnect the charging cable from the vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Do not attach the charging cable to the charge port while the vehicle is on the lift.
  2. If provided, lock the alignment slip/turn plates of the lift.
  3. Carefully drive the vehicle onto the lift, and stop the vehicle when equidistant between the front and rear of the lift.
    Tip:

    Have an assistant monitor the vehicle to make that the vehicle is centered on the lift.

  4. Make sure that the hood, liftgate, and all doors are closed, unless necessary for the work to be performed.
  5. Make sure that no part of the vehicle is in danger of contacting the ceiling, tool boxes, or other items in the service area when the vehicle is raised.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    If the procedure requires the hood, liftgate, or doors to be open while the vehicle is raised, closely watch their position as the vehicle is being raised to avoid contact with the lift mechanism, ceiling, or objects hanging from the ceiling.
  6. Raise the vehicle to the necessary service height, and then engage any lift safety locks.

Lower

  1. Make sure that no tools, equipment, other items, or personnel are under the vehicle or under any open doors.
  2. Disengage any lift safety locks, and fully lower the vehicle.
  3. Close any open hood, liftgate, or doors as necessary.
  4. Remove the vehicle from the lift.