2021-11-18

Duct - Air Wave - LH (RHD) (Remove and Replace)

Correction code 18108012 0.25 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the LH and RH instrument panel end caps. See End Cap - Instrument Panel - LH (Remove and Replace).
  2. Remove the main instrument panel decor trim. See Decor Trim - Instrument Panel - Main (Remove and Replace).
  3. Remove the LH footwell cover. See Cover - Footwell - Passenger (RHD) (Remove and Replace).
  4. Remove the glove box. See Glove Box - Without Knee Airbags (Remove and Replace).
  5. Remove the clips (x3) that attach the LH air wave duct, and then remove the air wave duct from the vehicle..

Install

Installation procedure is the reverse of removal.