Table 1. Torque Specifications: Armrest - Center Console (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screw that attaches the cap of the arrest hinge pin to the center console	1.6 Nm (1.2 lbs-ft)	Torx T15 socket 4 in extension	Reuse

Table 2. Torque Specifications: Bag Holder Hook - Underhood Storage Unit - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH bag holder hook to the frunk assembly	5 Nm (3.7 lbs-ft)	10 mm socket 4 in extension Ratchet/torque wrench	Reuse

Table 3. Torque Specifications: Center Console (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Center console side and rear corner to body bolts	7 Nm (5.2 lbs-ft)	10 mm socket 4 in extension ¼ in std ratchet ¼ in torque wrench (installation only)	Reuse
Inner front center console to body screws	1.7 Nm (1.3 lbs-ft)	Torx T20 socket 4 in extension ¼ in std ratchet Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only) Wiha ¼ in bit holder adapter Wiha torque setter	Reuse

Table 4. Torque Specifications: Check Base - Sun Visor - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the sun visor check base to the body	0.8 Nm (7 lbs-in)	Torx T15 socket ¼ in std ratchet ¼ in torque wrench (installation only)	Reuse

Table 5. Torque Specifications: Cup Holder (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the cup holder lower assembly to the center console	1.1 Nm (.8 lbs-ft)	Torx T20 socket 4 in extension	Reuse
Screw that attaches the armrest latch grommet to the cup holder	1.6 Nm (1.2 lbs-ft)	Torx T15 socket 2 in extension	Reuse

Table 6. Torque Specifications: Sliding Lid - Center Console (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the sliding lid to the center console	1.1 Nm (.8 lbs-ft)	Torx T20 socket 4 in extension ¼ in std ratchet	Reuse

Table 7. Torque Specifications:End Panel - Center Console (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the center console end panel to the center console	1.1 Nm (.8 lbs-ft)	Torx T20 socket 4 in extension	Reuse

Table 8. Torque Specifications: Insert - Front Bin - Center Console (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
			Reuse
Screws that attach the cup holder lower assembly to the center console	1.1 Nm (.8 lbs-ft)	Torx T20 socket 4 in extension	Reuse
Screws that attach the center console front bin insert to the center console	1.1 Nm (.8 lbs-ft)	Torx T20 socket 4 in extension	Reuse

Table 9. Torque Specifications: Panel - Door Trim - Rear - LH (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Rear door trim panel to rear door screws	6 Nm (4.4 lbs-ft)	Torx T30 socket ¼ in std ratchet 2 in extension ¼ in torque wrench (installation only)	Reuse	CAUTION Use ONLY the following fastener PN(s): 1488028-00-A or later 1526998-99-A or later

Table 10. Torque Specifications: Panel - Door Trim - Front - LH (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Front door trim panel to front door screws	6 Nm (4.4 lbs-ft)	Torx T30 socket 4 in extension ¼ in std ratchet ¼ in torque wrench (installation only)	Reuse	CAUTION Use ONLY the following fastener PN(s): 1488028-00-A or later 1526998-99-A or later

Table 11. Torque Specifications: Reinforcement Bracket - Underhood Storage Unit (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that secure the underhood reinforcement bracket	16 Nm (11.8 lbs-ft)	Ratchet/torque wrench 2 in extension 10 mm socket	Reuse
Bolts (x4) that attach the cooling fan module isolation brackets to the frunk reinforcement assembly	6 Nm (4.4 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm 12-point deep socket Ratchet/torque wrench	Reuse

Table 12. Torque Specifications: Underhood Storage Unit (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Underhood storage unit to body fasteners	5 Nm (3.7 lbs-ft)	10 mm socket ¼ in std ratchet 2 in extension	Reuse

Table 13. Torque Specifications: Glare Shield (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Front camera glare shield to windshield bracket fasteners	1 Nm (.7 lbs-ft)	Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only) Wiha torque setter T10 blade attachment	Replace	Fasteners have patch material

Table 14. Torque Specifications: Phone Tray - Center Console (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the center console phone tray to the center console	1 Nm (.7 lbs-ft)	Torx T20 socket 4 in extension	Reuse

Table 15. Torque Specifications: Sun Visor - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the sun visor to the vehicle	3.5 Nm (2.6 lbs-ft)	Torx T25 socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Reuse

Table 16. Torque Specifications: Trim - C-Pillar - Upper - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
			Replace