2026-02-03
Latch Pin - AC - Charge Port (China) (Rework)
Correction code
44019566
0.66
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
Equipment:
- 1450424-00-A Mini Ratchet Bit Set
Remove
- Remove the charge port latch pin. See Latch Pin - AC - Charge Port (China) (Remove and Replace).
Install
-
Inspect AC and DC pins, replace the charge port assembly it if the pin is bent,
Please replace.
-
Apply efficient amount of lubricant to
lubricate the AC latch stick and the o-ring.
- Install the charge port latch pin. See Latch Pin - AC - Charge Port (China) (Remove and Replace).