22/05/2018 13:17:56

Pivot Sleeve - Seat Back - 2nd Row - LH (Remove and Replace)

Correction code 13057102 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the 2nd row LH seat back assembly. See Seat Back - 2nd Row - LH (Remove and Replace).
  2. Release the tabs that attach the pivot sleeve to the seat back assembly pivot pin, and then remove the sleeve from the pin.

Install

Installation procedure is the reverse of removal.