Table 1. Torque Specifications: Beam - Cross Car (LHD) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH front wheel arch liner to the vehicle	5 Nm (3.7 lbs-ft)	10 mm deep socket Flex head ratchet/flex head torque wrench	Reuse
Lower bolt that attaches the windshield washer reservoir to the body	3 Nm (2.2 lbs-ft)	2 in extension 10 mm socket Flex head ratchet/flex head torque wrench Cordless Ratchet/Impact Driver	Reuse
Upper bolt that attaches the windshield washer reservoir to the body	3 Nm (2.2 lbs-ft)	2 in extension 10 mm socket Ratchet/torque wrench	Reuse
Bolts (x2) that attach the steering column to the body	25 Nm (18.4 lbs-ft)	3 in extension 13 mm socket Ratchet/torque wrench Cordless Ratchet/Impact Driver	Reuse
Bolt that attaches the HVAC assembly to the RH side of bulkhead	5.5 Nm (4.1 lbs-ft)	10 mm deep socket Cordless Ratchet/Impact Driver	Reuse
Nuts (x4) that attach the steering column to the cross car beam	15 Nm (11.1 lbs-ft)	3 in extension 13 mm socket Ratchet/torque wrench Cordless Ratchet/Impact Driver	Reuse
Bolts (x4) that attach the touchscreen brackets to the vehicle	12 Nm (8.8 lbs-ft)	2 in extension Torx T30 socket Ratchet/torque wrench	Reuse
Bolt that attaches the instrument panel electrical harness ground strap to the body	8 Nm (5.9 lbs-ft)	2 in extension 10 mm socket Ratchet/torque wrench	Replace	Inspect the bolt: if it is a self tapping tri-lobular bolt (1128269-00-A), discard the bolt. If it is a normal bolt (1447438-00-A), then it can be reused
Bolt and nut that attach the LH cross car beam bracket to the cross car beam	25 Nm (18.4 lbs-ft) 25 Nm (18.4 lbs-ft)	3 in extension 13 mm socket Ratchet/torque wrench	Reuse
Bolt and nut that attach the RH cross car beam bracket to the cross car beam	25 Nm (18.4 lbs-ft) 25 Nm (18.4 lbs-ft)	3 in extension 13 mm socket Ratchet/torque wrench	Reuse
Bolts (x5) that attach the cross car beam to the HVAC assembly	5.5 Nm (4.1 lbs-ft)	3 in extension 10 mm socket Ratchet/torque wrench Cordless Ratchet/Impact Driver	Reuse
Bolt that attaches the cross car beam to the upper side of the cowl	25 Nm (18.4 lbs-ft)	13mm 12pt combination wrench	Reuse
Bolts (x4) that attach the cross car beam to the body	29 Nm (21.4 lbs-ft)	3 in extension 15 mm socket Ratchet/torque wrench Cordless Ratchet/Impact Driver	Reuse

Table 2. Torque Specifications: Cover - Footwell - Driver (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screw that attaches the driver footwell cover to the vehicle	2.5 Nm (1.8 lbs-ft)	Torx T20 socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Reuse

Table 3. Torque Specifications: Decor Trim - Instrument Panel - Main (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the main decor trim to the LH and RH sides of the instrument panel	2.3 Nm (1.7 lbs-ft)	Torx T20 socket 4 in extension Ratchet/torque wrench	Reuse

Table 4. Torque Specifications: Finisher - Vent (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the vent finisher to the IP carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 socket 4 in extension Ratchet/torque wrench	Reuse

Table 5. Torque Specifications: Glove Box - With Knee Airbags (Non-Heat Pump) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x6) that attach the glove box to the IP carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Reuse

Table 6. Torque Specifications: IP Carrier (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Front passenger airbag to cross car beam bolt	8 Nm (5.9 lbs-ft)	External Torx E10 or Torx T30 socket 4 in extension ¼ in std ratchet ¼ in torque wrench (installation only)	Replace
IP carrier to cross car beam screws	2.3 Nm (1.7 lbs-ft)	Torx T20 socket 4 in extension ¼ in std ratchet ¼ in torque wrench (installation only)	Reuse

Table 7. Torque Specifications: IP Carrier (LHD) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the LH and RH window defroster ducts to the instrument panel carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 socket 2 in extension Ratchet/torque wrench	Reuse

Table 8. Torque Specifications: Speaker - Dash - Center (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screw that attaches the center dash speaker to the IP carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 bit Ratchet/torque wrench	Reuse

Table 9. Torque Specifications: Speaker - Dash - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screw that attaches the LH dash speaker to the IP carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 bit Ratchet/torque wrench	Reuse

Table 10. Torque Specifications: Tweeter - Dash (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screw that attaches the center dash tweeter to the IP carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 bit Ratchet/torque wrench	Reuse

Table 11. Torque Specifications: Vent - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screw that attaches the LH front vent to the IP carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 socket 4 in extension Ratchet/torque wrench	Reuse

Table 12. Torque Specifications: Vent - Front - RH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screw that attaches the RH front vent to the IP carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 socket 4 in extension Ratchet/torque wrench	Reuse

Table 13. Torque Specifications:

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes