2026-07-15
Diamond Cover - Seat Side - 1st Row - LH (Remove and Replace)
Correction code
13072402
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. NOTE: See Ergonomic Precautions for safe and healthy working
practices.
Note
Depending on build location, some vehicles may not be equipped with this
part.
Remove
- Remove the driver seat outboard side shield. See Side Shield - Outboard - Driver Seat (Remove and Replace)
-
Use the clip tool to sperate
the diamond cover from seat frame, rotate clockwise and remove it from the
LH front seat.
Install
-
Install the diamond cover
downward and engage the clip to the LH front seat.
- Install the driver seat outboard side shield. See Side Shield - Outboard - Driver Seat (Remove and Replace)