Table 1. Torque Specifications: Actuator - Latch - Hood (Single Actuator System) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the hood latch actuator to the front end carrier	5 Nm (3.7 lbs-ft)	10 mm socket 2 in extension Ratchet/torque wrench	Reuse

Table 2. Torque Specifications: Bracket - Active Hood Strut - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the strut bracket to the wheel arch, from inside the wheel arch.	13 Nm (9.6 lbs-ft)	10 mm socket 2 in extension Ratchet/torque wrench	Reuse
Bolt that attaches the strut bracket to the wheel arch, from on top of the bracket.	10 Nm (7.4 lbs-ft)	6 mm hex 2 in extension Ratchet/torque wrench	Reuse

Table 3. Torque Specifications: Bracket - Passive Hood Strut - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the strut bracket to the wheel arch, from inside the wheel arch.	13 Nm (9.6 lbs-ft)	10 mm socket 2 in extension Ratchet/torque wrench	Reuse
Bolt that attaches the strut bracket to the wheel arch, from on top of the bracket.	10 Nm (7.4 lbs-ft)	6 mm hex 2 in extension Ratchet/torque wrench	Reuse

Table 4. Torque Specifications: Closeout Panel - Door - Front - LH (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the window motor to the closeout panel	3 Nm (2.2 lbs-ft)	8 mm socket 2 in extension	Reuse
Bolts that attach the closeout panel to the door	4 Nm (2.9 lbs-ft)	8 mm socket 2 in extension	Reuse

Table 5. Torque Specifications: Handle - Exterior Release - Door - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the LH front door exterior release handle to the door	7 Nm (5.2 lbs-ft)	10 mm socket ¼ in std ratchet ¼ in torque wrench (installation only) 6 in extension	Reuse

Table 6. Torque Specifications: Handle - Exterior Release - Door - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the LH front door exterior release handle to the door	7 Nm (5.2 lbs-ft)	10 mm socket 6 in extension	Reuse

Table 7. Torque Specifications: Glass - Door - LH - Front (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that secure the LH front door regulator isolator clamps	9.5 Nm (7.0 lbs-ft)	13 mm socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Replace

Table 8. Torque Specifications: Glass - Door - LH - Rear (Adjust)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the window glass to the window regulator	9.5 Nm (7.0 lbs-ft)	13 mm socket Flex head ratchet/flex head torque wrench 2 in extension	Replace
Fasteners that attach the window regulator to the closeout panel	10 Nm (7.4 lbs-ft)	10 mm socket 2 in extension	Reuse

Table 9. Torque Specifications: Glass - Door - LH - Rear (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH rear door glass to the regulator isolator clamps	9.5 Nm (7.0 lbs-ft)	13 mm socket Flex head ratchet/flex head torque wrench 2 in extension	Replace

Table 10. Torque Specifications: Hinge - Power Trunk - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the power trunk hinge to the trunk lid	24 Nm (17.7 lbs-ft)	13 mm socket 4 in extension Ratchet/torque wrench	Reuse
Nut that attaches the power trunk hinge to the body	24 Nm (17.7 lbs-ft)	13 mm socket 4 in extension Ratchet/torque wrench	Reuse

Table 11. Torque Specifications: Latch - Cinch - Trunk (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the trunk cinch latch to the trunk lid	8 Nm (5.9 lbs-ft)	10 mm socket 4 in extension Ratchet/torque wrench	Reuse

Table 12. Torque Specifications: Latch - Door - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH front door latch to the door	10 Nm (7.4 lbs-ft)	Torx T25 socket 4 in extension	Reuse

Table 13. Torque Specifications: Latch - Hood (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the hood latch to the front end carrier	8 Nm (5.9 lbs-ft)	10 mm socket 2 in extension Ratchet/torque wrench	Reuse

Table 14. Torque Specifications: Striker - Hood (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the striker to the hood	18 Nm (13.3 lbs-ft)	T40 socket	Reuse	Do not torque until vehicle is within gap and flush specification

Table 15. Torque Specifications: Striker - Door - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the front door striker to the body	26 Nm (19.2 lbs-ft)	T45 socket	Reuse

Table 16. Torque Specifications: Switch - Power Trunk - Interior (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the interior power trunk switch to the power trunk lid trim	1 Nm (.7 lbs-ft)	Torx T20 socket Ratchet/torque wrench	Reuse

Table 17. Torque Specifications: Switch - Window - Driver (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the lower bolt cover to the LH front door trim panel	6 Nm (4.4 lbs-ft)	Torx T30 socket 6 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 18. Torque Specifications: Latch - Trunk (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the trunk latch to the trunk lid	8 Nm (5.9 lbs-ft)	10 mm socket	Reuse

Table 19. Torque Specifications:

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes