Skid Plate - HV Battery - Front (Remove and Replace)
Correction code
16102002
0.36
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the front aero shield. See Panel - Aero Shield - Front (Remove and Replace).
-
Remove the bolts and clips
that attach the skid plate to the battery, and then remove the plate from
the battery.
13 Nm (9.6 lbs-ft)
Install
Installation procedure is the reverse of removal.