Reflector - Fascia - Rear - LH (Remove and Replace)
Correction code
17403502
0.96
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the rear fascia assembly and place it on a padded surface. See Fascia - Rear (Remove and Install).
-
Release the clips (x2) that attach the LH rear fascia reflector to the rear fascia assembly, and remove the reflector from the fascia.
Install
Installation procedure is the reverse of removal.