26/03/2018 12:22:44

Frame - Seat Back - 2nd Row - LH (Remove and Replace)

Correction code 13054702 0.60 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  2. Remove the LH 2nd row seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  3. Remove the rear LH sill panel trim. See Trim - Sill Panel - Rear - LH (Remove and Replace).
  4. Remove the LH 2nd row seat back. See Seat Back - 2nd Row - LH (Remove and Replace).
  5. Remove the LH 2nd row seat back pivot sleeve. See Pivot Sleeve - Seat Back - 2nd Row - LH (Remove and Replace).
  6. Remove the LH 2nd row seat back hinge bracket. See Bracket - Hinge - Seat Back - 2nd Row - LH (Remove and Replace).
  7. Remove the 2nd row armrest. See Armrest - 2nd Row (Remove and Replace).
  8. Remove the Center 2nd row headrest. See Headrest - 2nd Row - Center (Remove and Replace).
  9. Remove the headrest guide locks.
  10. Remove the 2nd row armrest closeout. See Closeout - Armrest - 2nd Row (Remove and Replace).
  11. Remove the Center 2nd row seatbelt. See Seatbelt - 2nd Row - Center (Remove and Replace).
  12. Remove the LH 2nd row seat back latch. See Latch - Seat Back - 2nd Row - LH (Remove and Replace).
  13. Remove the LH 2nd row seat back handle. See Handle - Seat Back - 2nd Row - LH (Remove and Replace).

Install

Installation procedure is the reverse of removal.