Skull Cap - Door Mirror - LH (Remove and Replace)
Correction code 12091702 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
-
Pull outward to release the clips that attach the rear of the LH door mirror skull cap to the LH door mirror.
- Pry up along the inside and outside edge of the LH door mirror skull cap, working toward the front of the skull cap.
- Release the remaining clips that attach the LH door mirror skull cap to the LH door mirror, and then remove the skull cap from the door mirror.
Install
Installation procedure is the reverse of removal.
- Position the LH door mirror skull cap over the LH door mirror, and align the skull cap tabs to the door mirror.
-
Push down on the top of the LH door mirror skull cap to fasten the clips that attach the skull cap to the LH door mirror.
NotePress at the inside and outside edges of the skull cap, until an audible click is heard.NoteMake sure the gaps between the inner perimeter of sthe kull cap and door mirror assembly are within specification.