25/02/2021 09:48:08

Bolster - Side - Seat - 2nd Row - LH (Remove and Replace)

Correction code 13055102 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Fold down the LH 2nd row seat.
  2. Pull the 2nd row side bolster inward, and then move the bolster up to remove from the vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    The retaining clips may become dislodged when performing this procedure. Wear eye protection to avoid personal injury.
  3. Remove and discard the bolster plastic bracket from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    The bracket might have come out with the bolster.

Install

  1. Install new bolster plastic bracket to the 2nd row seat side bolster.
    Informational PurposesAn informational icon, calling your attention
    Note
    The bracket is one time use only.
  2. Align the bottom tab, and then push inward to install the bolster.