Table 1. Torque Specifications: Cover - Rear Suspension - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the rear suspension cover to the lower rear control arm assembly	6 Nm (4.4 lbs-ft)	10 mm socket 2 in extension	Reuse

Table 2. Torque Specifications: Damper Assembly - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts (x3) that attach the LH spring and damper assembly to the FUCA mount	23 Nm (17.0 lbs-ft)	13 mm socket 3 in extension	Reuse
New nut that attaches the stabilizer bar link to the LH front spring and damper assembly	98 Nm (72.3 lbs-ft)	18 mm socket Torx T40 socket	Replace
Bolt and new nut that attaches the upper control arm to the knuckle	56 Nm (41.3 lbs-ft)	Torx T50 socket 15 mm combination wrench	Reuse/Replace	Replace the nut
Nut that attaches the LH front jounce hose bracket to the vehicle	6 Nm (4.4 lbs-ft)		Reuse	Dual motor vehicles only
New bolt that attaches the LH ABS wheel speed sensor to the knuckle	5 Nm (3.7 lbs-ft)	10 mm socket	Replace
Bolt and nut that attach the LH front spring and damper assembly to the lower control arm	106 Nm (78.2 lbs-ft)	21 mm socket	Reuse

Table 3. Torque Specifications: Damper - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the rear damper to the body at the top mount	41 Nm (30.2 lbs-ft)	15 mm socket 3 in extension	Reuse
Nut and bolt securing rear damper to rear lower aft link	115 Nm (84.8 lbs-ft)	21 mm wrench 21 mm socket	Reuse	Mark with paint pen

Table 4. Torque Specifications: Drop Link - Stabilizer Bar - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the LH drop link to the rear stabilizer bar and rear LH knuckle	55 Nm (40.6 lbs-ft)	5 mm hex socket 15 mm combination flex head wrench 15 mm socket flex head ratchet	Replace

Table 5. Torque Specifications: Four Wheel Alignment Check and Adjust

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Lower Aft Link to Knuckle Bolt	115 Nm (84.8 lbs-ft)		Reuse
Lower Aft Link to Subframe Bolt	115 Nm (84.8 lbs-ft)		Reuse
Upper Aft Link to Subframe Bolt	134 Nm (98.8 lbs-ft)		Reuse
Nut on the rear LH toe link to subframe bolt	85 Nm (62.7 lbs-ft)		Reuse
LH FUCA mount bolts	62 Nm (45.7 lbs-ft)		Reuse
Smaller LH FUCA mount bolts	35 Nm (25.8 lbs-ft)		Reuse
Jam nut on the LH inner tie rod	80 Nm (59.0 lbs-ft)		Reuse

Table 6. Torque Specifications: Control Arm - Upper - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Smaller bolts that attach the LH front upper control arm mount to the body	35 Nm (25.8 lbs-ft)	13 mm socket 3 in extension	Reuse
Larger bolts that attach the LH front upper control arm mount to the body	62 Nm (45.7 lbs-ft)	15 mm socket 3 in extension	Reuse
Bolt that attaches the LH front ride height sensor arm to the upper control arm	8 Nm (5.9 lbs-ft)	10 mm socket Flex head ratchet/flex head torque wrench 4 in extension	Reuse
Nyloc nut that attaches the front stabar link to the front strut	98 Nm (72.3 lbs-ft)		Replace (1111543-00-A-)
Nuts that attach the LH front upper control arm to the to knuckle	56 Nm (41.3 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench Torx T50 socket	Replace
Bolts securing LH upper control arm to FUCA mount	50 Nm (36.9 lbs-ft)	13 mm socket Flex head ratchet/flex head torque wrench	Reuse

Table 7. Torque Specifications: Hub - Front - LH (Dual Motor) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
LH front drive unit halfshaft nut	300 Nm (221.2 lbs-ft)	32 mm deep impact socket	Replace
Bolt that attaches the LH front rotor to the LH front hub	5 Nm (3.7 lbs-ft)	10 mm socket 2 in extension Ratchet/torque wrench	Reuse
Bolt that attaches the front brake hose bracket to the LH front knuckle	5 Nm (3.7 lbs-ft)	10 mm socket Flex head ratchet/flex head torque wrench 4 in extension	Reuse
Bolts that attach the LH front caliper to the LH front knuckle	94 Nm (69.3 lbs-ft)	External Torx E18	Replace
Bolts that attach the LH front hub and bearing to the LH front knuckle	85 Nm (62.7 lbs-ft)	18 mm socket Flex head ratchet/flex head torque wrench 3 in extension	Reuse

Table 8. Torque Specifications: Hub - Front - LH (RWD) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH front hub to the knuckle	85 Nm (62.7 lbs-ft)	18 mm socket 3 in extension	Reuse

Table 9. Torque Specifications: Link - Compliance - Lower - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the front LH lower compliance link to the knuckle	180 Nm (132.7 lbs-ft)	Ratchet/torque wrench Torx T45 socket 22 mm socket Combination Wrench 12pt 22mm	Replace
Bolt and nut that attach the link to the front subframe	115 Nm (84.8 lbs-ft) 115 Nm (84.8 lbs-ft)	21 mm socket 21 mm deep socket Cordless Ratchet/Impact Driver 6 in extension Combination Wrench 12pt 21mm Ratchet/torque wrench	Reuse

Table 10. Torque Specifications:

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt and nut that attach the RH rear upper fore link to the subframe	76 Nm (56.0 lbs-ft)	Flex head ratchet/flex head torque wrench 18 mm socket 18mm 12pt combination wrench 3 in extension	Reuse

Table 11. Torque Specifications: Link - Lateral - Lower - Front - LH (Remove and Replace) / Links - Lateral - Lower - Front - Pair (Remove & Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Precote 85 Patch Bolts (x2) that attach the LH front lower lateral link to the front subframe	190 Nm (140.1 lbs-ft)	21 mm socket	Replace	2123635-00-A (Currently only available in EMEA and APAC. In NA, use only 1109912-00-B)
Nylon Patch Bolts (x2) that attach the LH front lower lateral link to the front subframe (old version)	135 Nm (99.6 lbs-ft)	21 mm socket	Replace	1109912-00-B
Bolt and nut that attach the LH strut to the LH front lower lateral link	106 Nm (78.2 lbs-ft) 106 Nm (78.2 lbs-ft)	21 mm socket	Reuse
Nut to attach the LH front lower lateral link to the knuckle	180 Nm (132.7 lbs-ft)	22 mm socket	Replace	1109263-00-B or newer
Bolt that attaches the LH front brake rotor to the knuckle	5 Nm (3.7 lbs-ft)	10 mm socket	Reuse

Table 12. Torque Specifications: Stabilizer Bar - Front (Remove and Replace) / Bushing Bracket - Stabilizer Bar - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the front stabilizer bar to the LH and RH front stabilizer bar links	98 Nm (72.3 lbs-ft)	Torx T40 bit Combination Wrench 12pt 18mm	Replace	1111543-00-A
Nuts that attach the front stabilizer bar to the front subframe	35 Nm (25.8 lbs-ft)	15 mm deep socket	Replace	1111145-00-A

Table 13. Torque Specifications: Stabilizer Bar - Rear (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the stabilizer bar to the end links	55 Nm (40.6 lbs-ft)	15 mm socket 5 mm hex	Replace
Bolts that attach the rear stabilizer bar to the rear subframe	30 Nm (22.1 lbs-ft)	11 mm socket 6 in extension	Replace

Table 14. Torque Specifications: Suspension - Rear (Check Torque)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH and RH rear suspension covers to the vehicle	6 Nm (4.4 lbs-ft)	10 mm socket 2 in extension
Bolts (x3) that attach the LH and RH shear plates to the HV battery	35 Nm (25.8 lbs-ft) 130 Nm (95.9 lbs-ft)	13 mm socket 21 mm socket 3 in extension 6 in extension
Nut that attaches the LH rear lower fore link to the rear subframe	76 Nm (56.0 lbs-ft)	18 mm socket 18 mm combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH rear lower fore link to the knuckle	76 Nm (56.0 lbs-ft)	18 mm socket 18 mm ratcheting combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the rear stabilizer bar to the LH stabilizer bar link	55 Nm (40.6 lbs-ft)	15 mm socket 5 mm hex socket 15 mm flex head combination ratcheting wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH stabilizer bar link to the knuckle	55 Nm (40.6 lbs-ft)	15 mm socket 5 mm hex socket 15 mm flex head combination ratcheting wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH toe link to the rear subframe	85 Nm (62.7 lbs-ft)	18 mm deep socket 18 mm combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH toe link to the knuckle	76 Nm (56.0 lbs-ft)
Nut that attaches the LH rear lower aft link to the rear subframe	115 Nm (84.8 lbs-ft)	21 mm socket 21 mm combination wrench
Nut that attaches the LH rear lower aft link to the knuckle	115 Nm (84.8 lbs-ft)	21 mm socket 21 mm ratcheting combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH rear damper assembly to the LH lower aft link	115 Nm (84.8 lbs-ft)
Nut that attaches the LH rear upper fore link to the rear subframe	76 Nm (56.0 lbs-ft)	18 mm socket 18 mm combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH rear upper fore link to the knuckle	76 Nm (56.0 lbs-ft)
Nut that attaches the LH rear upper aft link to the rear subframe	134 Nm (98.8 lbs-ft)	21 mm socket 21 mm combination wrench
Nut that attaches the LH rear upper aft link to the knuckle	134 Nm (98.8 lbs-ft)
Bolts that attach the rear diffuser to the body	4 Nm (2.9 lbs-ft)	10 mm socket 2 in extension

Table 15. Torque Specifications: Sensor - Ride Height - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the LH rear ride height sensor to the LH rear upper aft link	10 Nm (7.4 lbs-ft)	10 mm deep socket Flex head ratchet/flex head torque wrench Ratchet/torque wrench	Reuse
Nut that attaches the LH rear ride height sensor to the rear subframe	10 Nm (7.4 lbs-ft)	10 mm deep socket Flex head ratchet/flex head torque wrench Ratchet/torque wrench	Reuse