Torque Specifications - Electrical

Table 1. Torque Specifications: Harness - Busbar - 12V DCDC (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the DCDC ground busbar to the body	20 Nm (14.7 lbs-ft)	12 mm socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse
Nut that attaches the DCDC ground busbar to the HV battery	9 Nm (6.6 lbs-ft)	13 mm socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Replace

Table 2. Torque Specifications: Rear Fascia Light - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the rear upper fascia to the rear fascia	3 Nm (2.2 lbs-ft)	Ratchet/torque wrench 10 mm socket	Reuse
Bolts (x2) and clip that attach the LH rear fascia lamp to the rear fascia	2.5 Nm (1.8 lbs-ft)	Cordless Ratchet/Impact Driver Torx T25 socket Torque Wrench Hexagon - 1060071-00-A (for installation only)	Reuse

Table 3. Torque Specifications: Module - Body Controller - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH body controller module onto the vehicle	4.75 Nm (3.5 lbs-ft)	Ratchet/torque wrench 10 mm 12-point deep socket 2 in extension Ratchet/torque wrench (for installation only)	Replace

Table 4. Torque Specifications: Radar Assembly - Interior (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the interior radar to the body	10 Nm (7.4 lbs-ft)	Pick Miniature Soft Grip, 90 degree tip, 6 in 10 mm magnetic deep 6 in nutsetter Cordless hex driver	Reuse

Table 5. Torque Specifications: Shield - Body Controller - Front (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the front body controller shield to the front body controller	8.5 Nm (6.3 lbs-ft)	10 mm socket Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 6. Torque Specifications: Wiper Arm - Driver Side (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the LH wiper arm to the wiper motor assembly	25 Nm (18.4 lbs-ft)	15 mm socket Ratchet/torque wrench	Reuse

Table 7. Torque Specifications: Trunk Lid Light - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut and bolts (x2) that attach the taillight to the body	3.2 Nm (2.4 lbs-ft)	8 mm deep socket Ratchet/torque wrench	Reuse

Table 8. Torque Specifications: Harness - Windshield (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the windshield harness to the windshield bracket	1 Nm (.7 lbs-ft)	Torx T10 socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 9. Torque Specifications: Camera - Sider Repeater - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the LH front side repeater camera to the side repeater assembly	0.6 Nm (5 lbs-in)	Torx T8 bit Ratchet/torque wrench	Reuse

Table 10. Torque Specifications: Camera - B-Pillar - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the LH B-pillar camera to the LH B-pillar applique	0.6 Nm (5 lbs-in)	Torx T8 bit Ratchet/torque wrench	Reuse

Table 11. Torque Specifications: Camera - B-Pillar - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the LH B-pillar camera to the LH B-pillar applique	0.6 Nm (5 lbs-in)	Torx T8 bit Ratchet/torque wrench	Reuse

Table 12. Torque Specifications: LV Battery (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that secures the positive jump post to the LV battery bracket	5 Nm (3.7 lbs-ft)	4 in extension 8 mm socket Cordless 1/4in Dr Ratchet	Reuse
Bolts (X3) that secures the LV battery	6 Nm (4.4 lbs-ft)	4 in extension 8 mm socket Cordless 1/4in Dr Ratchet	Reuse

Table 13. Torque Specifications: Module - BLE - Interior (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the interior BLE module to the vehicle	10 Nm (7.4 lbs-ft)	10 mm socket Ratchet/torque wrench 4 in extension	Reuse

Table 14. Torque Specifications: BLE Assembly - Rear - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH rear trough trim to the vehicle	1.2 Nm (.9 lbs-ft)	Cordless Ratchet/Impact Driver Torx T20 socket Torx T20 bit Ratchet/torque wrench	Reuse
Bolt that attaches the rear fascia to the vehicle	4 Nm (2.9 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm socket 2 in extension Ratchet/torque wrench	Reuse
Bolt and the U-nut that attach the rear fascia to the vehicle	2 Nm (1.5 lbs-ft)	Cordless Ratchet/Impact Driver Torx T25 socket 2 in extension Ratchet/torque wrench	Reuse

Table 15. Torque Specifications: Camera - Forward Facing (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x4) that attach the mount plate to the forward facing camera and the windshield bracket	1 Nm (.7 lbs-ft)	Torx T10 bit Ratchet/torque wrench	Replace

Table 16. Torque Specifications: Fan - Triple Cam (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x3) that attach the triple camera fan to the camera	0.12 Nm (1 lbs-in)	Torx T6 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse

Table 17. Torque Specifications: Camera - Interior (LHD) (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x2) securing interior camera to camera upper cover	1 Nm (.7 lbs-ft)	Cordless 1/4in Dr Ratchet Torx T10 bit	Reuse

Table 18. Torque Specifications: Module - Body Controller - Front (Gen 3) (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the front body controller module to the body	10 Nm (7.4 lbs-ft)	Flex head ratchet/flex head torque wrench 10 in extension 10 mm socket Ratchet/torque wrench	Reuse
Bolts that attach the ground strap and the front body controller module cover to the front body controller module	8.5 Nm (6.3 lbs-ft)	Flex head ratchet/flex head torque wrench 4 in extension 10 mm socket Ratchet/torque wrench	Reuse

Table 19. Torque Specifications: Wiper Module (RHD) (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the wiper module to the body	7 Nm (5.2 lbs-ft)	2 in extension Cordless Ratchet/Impact Driver 10 mm socket Ratchet/torque wrench	Reuse

Table 20. Torque Specifications: Wiper Module (LHD) (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the wiper module to the body	7 Nm (5.2 lbs-ft)	2 in extension Cordless Ratchet/Impact Driver 10 mm socket Ratchet/torque wrench	Reuse

Table 21. Torque Specifications: Vehicle Controller - USB Assembly (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x4) and datum that attach the USB hub to the center console	1.1 Nm (.8 lbs-ft)	2 in extension Cordless Ratchet/Impact Driver Torx T20 socket Ratchet/torque wrench	Reuse

Table 22. Torque Specifications: Speaker - Pedestrian Warning (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x3) that attach the pedestrian warning speaker to the vehicle	1.8 Nm (1.3 lbs-ft)	Torx T25 socket 2 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 23. Torque Specifications: Assembly - Reservoir - Windshield Washer (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the windshield washer reservoir to the body	4 Nm (2.9 lbs-ft)	10 mm deep socket Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 24. Torque Specifications:
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the Homelink transmitter module bracket to the RH side of the front end carrier	8 Nm (5.9 lbs-ft)	10 mm deep socket Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 25. Torque Specifications: Fan - Triple Cam (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x3) that attach the triple camera fan to the camera	0.12 Nm (1 lbs-in)	Torx T6 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse