17/10/2023 18:49:59

Bezel - Handle - Seat Back - 2nd Row - LH (Remove and Replace)

Correction code 1305020062 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the LH rear door.
  2. Lower the LH rear window.
  3. Fold the LH 2nd row seat down.
  4. Use a pry tool to release the clips (x2) that attach the LH 2nd row seat back handle bezel to the LH 2nd row seat back handle assembly, and then remove the bezel from the handle assembly.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

Install

  1. Install the LH 2nd row seat back handle bezel into the LH 2nd row seat back handle assembly, and then fasten the clips (x2) that attach the bezel to the handle assembly.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
  2. Unfold the LH 2nd row seat back so that it is upright and secured.
  3. Raise the LH rear window.
  4. Close the LH rear door.