17/10/2023 18:53:04

Harness - Rear Door Trim - LH (Remove and Replace)

Correction code 1710020012 FRT 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the LH rear door, and then lower the LH rear window.
  2. Remove the LH rear door puddle light. See Puddle Lamp - Front Door (Remove and Replace).
  3. Remove the LH rear door trim panel. See Panel - Door Trim - Rear - LH (Remove and Replace).
  4. Remove the LH rear door NVH pad. See NVH Pad - Door - Rear - LH (Remove and Replace).
  5. Disconnect the LH rear door electric release switch connector from the LH rear door trim panel.
  6. Disconnect the LH rear door window switch connector from the LH rear door trim panel.
  7. Disconnect the LH rear door LED light connector from the LH rear door trim panel.
  8. Disconnect the LH rear door atmosphere light connector from the LH rear door trim panel.
  9. Disconnect the LH rear door speaker connector from the LH rear door trim panel.
  10. Release the clips (x5) that attach the LH rear door harness to the LH rear door trim panel, and then remove the harness from the vehicle.

Install

  1. Install the clips (x5) that attach the LH rear door harness to the LH rear door trim panel.
  2. Connect the LH rear door speaker connector to the LH rear door trim panel.
  3. Connect the LH rear door atmosphere light connector to the LH rear door trim panel.
  4. Connect the LH rear door LED light connector to the LH rear door trim panel.
  5. Connect the LH rear door window switch connector from the LH rear door trim panel.
  6. Connect the LH rear door electric release switch connector to the LH rear door trim panel.
  7. Install the LH rear door NVH pad. See NVH Pad - Door - Rear - LH (Remove and Replace).
  8. Install the LH rear door puddle light. See Puddle Lamp - Front Door (Remove and Replace).
  9. Install the LH rear door trim panel. See Panel - Door Trim - Rear - LH (Remove and Replace).
  10. Raise the LH rear window, and then close the LH rear door.