Table 1. Torque Specifications: Ankle Catcher (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH upper section of the front end carrier to the body	16 Nm (11.8 lbs-ft)	Ratchet/torque wrench 13 mm socket 4 in extension	Reuse
Bolts (x2) that attach the front end carrier to the LH subframe crash can	16 Nm (11.8 lbs-ft)	Ratchet/torque wrench 13 mm socket 2 in extension	Reuse
Bolt that attaches the bottom of the condenser fan module to the ankle catcher	10 Nm (7.4 lbs-ft)	Ratchet/torque wrench (for installation only) Cordless Ratchet/Impact Driver 8 mm socket	Reuse

Table 2. Torque Specifications: Bracket - Rear - Center (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x5) that attach the rear center bracket to the body	4 Nm (2.9 lbs-ft)	4 in extension 10 mm socket Ratchet/torque wrench	Reuse	Bolt is patched.

Table 3. Torque Specifications: Bracket - Rear Wing - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the rear wing bracket to the vehicle	3.5 Nm (2.6 lbs-ft)	8 mm socket Ratchet/torque wrench 4 in extension Torque Wrench Hexagon - 1060071-00-A	Reuse

Table 4. Torque Specifications: Bracket - Tail Lamp - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the rear center bracket to the vehicle	4 Nm (2.9 lbs-ft)	10 mm socket 4 in extension Ratchet/torque wrench Hexagon - 1060071-00-A	Reuse
Bolts (x2) that attach the LH taillight bracket to the vehicle	4 Nm (2.9 lbs-ft)	10 mm socket 4 in extension Ratchet/torque wrench Torque Wrench Hexagon - 1060071-00-A	Reuse

Table 5. Torque Specifications: Bumper Beam - Front (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x4) that attach the front bumper beam to the LH and RH crush cans.	75 Nm (55.3 lbs-ft)	Cordless Ratchet/Impact Driver 15 mm socket Flex head ratchet/flex head torque wrench	Reuse
Bolts (x2) that attach the center impact accelerometer sensor bracket to the front bumper beam.	10 Nm (7.4 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm socket Ratchet/torque wrench (for installation only)	Reuse

Table 6. Torque Specifications: Door - Front - LH (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH front door check strap to the vehicle	24 Nm (17.7 lbs-ft)	13mm Flex Head Ratcheting Combination Wrench Ratchet/torque wrench 13 mm socket	Reuse
Bolts (x4) that attach the hinges to the LH front door	27 Nm (19.9 lbs-ft)	10mm 12pt combination wrench Flex head ratchet/flex head torque wrench 3/8in Crowfoot Open End Set - 1079485-00-A	Reuse

Table 7. Torque Specifications: Bumper Beam - Rear (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts (x6) that attach the rear bumper beam or trailer hitch to the vehicle.	60 Nm (44.2 lbs-ft)	6 in extension Ratchet/torque wrench Cordless Ratchet/Impact Driver 15 mm deep socket Torque wrench with angle measurement (for installation only)	Reuse

Table 8. Torque Specifications: Trailer Hitch - Rear Energy Absorber (Retrofit)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts (x6) that attach the rear bumper beam or trailer hitch to the vehicle.	60 Nm (44.2 lbs-ft)	6 in extension Ratchet/torque wrench Cordless Ratchet/Impact Driver 15 mm deep socket Torque wrench with angle measurement (for installation only)	Reuse
Nut (x1) that attaches the trailer hitch ECU to the trailer hitch assembly.	6 Nm (4.4 lbs-ft)	Ratchet/torque wrench 10 mm deep socket	Reuse	Add washer below ECU to prevent damage.
Bolts (x3) that attach the trailer jumper harness to the trailer hitch assembly.	2.5 Nm (1.8 lbs-ft)	Wiha Torque Screwdriver 0.8-5 Nm screwdriver (installation only) Torx T25 socket	Reuse

Table 9. Torque Specifications: Crush Can - Lower - Front (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the crush can to the vehicle	53 Nm (39.1 lbs-ft)	Ratchet/torque wrench 3 in extension 15 mm socket Cordless Ratchet/Impact Driver	Replace	Bolt is patched.

Table 10. Torque Specifications: Fascia - Front (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x5) that attach the upper portion of the front fascia to the vehicle	3.5 Nm (2.6 lbs-ft)	Cordless hex driver 6 in nutsetter + 10 mm magnetic deep Torque wrench hexagon 1060071-00-A (for installation only)	Reuse
Bolt that attaches the front fascia to the LH front fender	2.5 Nm (1.8 lbs-ft)	Cordless hex driver 6 in nutsetter + 8 mm magnetic deep Torque wrench hexagon 1060071-00-A (for installation only)	Reuse
Bolts (x4) that attach the valance to the front aero shield panel	5 Nm (3.7 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm deep socket Torque wrench with angle measurement (for installation only)	Reuse
Nuts (x2) that attach the valance to the vehicle	3 Nm (2.2 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm socket Ratchet/torque wrench (for installation only)	Reuse
Bolts (x8) that attach the valance to the fascia	3 Nm (2.2 lbs-ft)	Cordless Ratchet/Impact Driver Torx T40 socket 4 in extension Ratchet/torque wrench (for installation only)	Reuse
Bolts (x2) that attach the grille to the front fascia	1.8 Nm (1.3 lbs-ft)	Torx T25 socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench (for installation only)	Reuse

Table 11. Torque Specifications: Fascia Assembly - Rear (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the LH and RH trough trims to the body	1.2 Nm (.9 lbs-ft)	Torx T25 socket	Reuse
Bolts (x2) that attach the LH and RH corners of the rear fascia to the body	4 Nm (2.9 lbs-ft)	10 mm socket	Reuse
Bolts (x5) that attach the rear portion of the mid aero shield to the vehicle	5 Nm (3.7 lbs-ft)	10 mm socket	Reuse
Bolts (x4) that attach the rear diffuser to the vehicle	4 Nm (2.9 lbs-ft)	10 mm socket	Reuse
Screws and U-nuts that attach the rear fascia to the quarter panel	2 Nm (1.5 lbs-ft)	Torx T25 socket	Reuse

Table 12. Torque Specifications: Fascia - Rear - Lower (Base) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x4) that attach the lower rear fascia to the upper rear fascia	3 Nm (2.2 lbs-ft)	10 mm socket Cordless Ratchet/Impact Driver	Reuse

Table 13. Torque Specifications: Glass - Door - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Patched bolts that attach the door glass to the regulator isolator clamps	9.5 Nm (7.0 lbs-ft)	13 mm socket 2 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench (for installation only)	Replace	1101805-00-B

Table 14. Torque Specifications: Grille - Fascia - Front (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the grille to the front fascia	1.8 Nm (1.3 lbs-ft)	4 in extension Cordless Ratchet/Impact Driver Torx T25 socket Ratchet/torque wrench (for installation only)	Reuse
Screws (x2) that attach the front fascia camera cover to the front fascia assembly	4 Nm (2.9 lbs-ft)	Torx T20 socket	Reuse

Table 15. Torque Specifications: Reinforcement - Fascia - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the fascia reinforcement to the front end of carrier	5 Nm (3.7 lbs-ft)	4 in extension 10 mm deep socket Cordless hex driver Ratchet/torque wrench (for installation only)	Reuse

Table 16. Torque Specifications: Valance - Front Fascia (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x3) that attach the pedestrian warning speaker to the valance	1.8 Nm (1.3 lbs-ft)	Cordless 1/4in Dr Ratchet Torx T25 socket Flex head ratchet/flex head torque wrench	Reuse
Bolts (x8) that attach the valance to the fascia	3 Nm (2.2 lbs-ft)	Torx T40 socket Cordless 1/4in Dr Ratchet 4 in extension Ratchet/torque wrench	Reuse
Nuts (x2) at the LH and RH corners of the valance	3 Nm (2.2 lbs-ft)	10 mm socket Cordless 1/4in Dr Ratchet Ratchet/torque wrench	Reuse

Table 17. Torque Specifications: Glass - Door - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the door glass to the regulator isolator clamps	9.5 Nm (7.0 lbs-ft)	13 mm socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Replace

Table 18. Torque Specifications: Fascia - Front (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x5) that attach the upper portion of the front fascia to the vehicle	4 Nm (2.9 lbs-ft)	Cordless Ratchet/Impact Driver 10mm 6in deep Nutsetter Ratchet/torque wrench 1060071-00-A Torque Wrench ¼ in Dr Hexagon	Reuse
Bolt that attaches the front fascia to the LH and RH front fender	4 Nm (2.9 lbs-ft)	Cordless Ratchet/Impact Driver 10mm 6in deep Nutsetter 1060071-00-A Torque Wrench ¼ in Dr Hexagon	Reuse
Bolts (x4) that attach the valance to the front aero shield panel	5 Nm (3.7 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm deep socket 1076971-02-A Torque Wrench ¼ in Dr. +Angle	Reuse

Table 19. Torque Specifications: Super Horn (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x3) that attach the pedestrian warning speaker to the valance	1.8 Nm (1.3 lbs-ft)	Cordless 1/4in Dr Ratchet Torx T25 socket Flex head ratchet/flex head torque wrench	Replace

Table 20. Torque Specifications: Hood Assembly (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts (x4) that attach the LH and RH hood strut brackets to the hood	15 Nm (11.1 lbs-ft)	Ratchet/torque wrench 3 in extension 13 mm socket Flex head ratchet/flex head torque wrench	Reuse
Nuts (x4) that attach the hood to the LH and RH hood hinges	15 Nm (11.1 lbs-ft)	Ratchet/torque wrench 3 in extension 13 mm socket Flex head ratchet/flex head torque wrench	Reuse
Bolts (x2) that attach the hood striker to the hood	18 Nm (13.3 lbs-ft)	3 in extension Cordless Ratchet/Impact Driver 10 mm socket Flex head ratchet/flex head torque wrench	Reuse

Table 21. Torque Specifications: Brace - Shock Tower (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that secures the A/C compressor ground strap	7 Nm (5.2 lbs-ft)	Torx T25 socket Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse
Bolts (x4) that attach the supermanifold and the A/C compressor to the shock tower brace	31 Nm (22.9 lbs-ft)	Flex head ratchet/flex head torque wrench 15 mm socket Cordless Ratchet/Impact Driver	Reuse
Bolts (x6) that secure the both sides of the shock tower brace	55 Nm (40.6 lbs-ft) 62 Nm (45.7 lbs-ft)	Cordless Ratchet/Impact Driver 15 mm socket Flex head ratchet/flex head torque wrench	Reuse

Table 22. Torque Specifications: Trunk (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the trunk harness ground strap to the trunk lid	8 Nm (5.9 lbs-ft)	10 mm socket Cordless Ratchet/Impact Driver Ratchet/torque wrench	Replace	Inspect bolt: if it is a self tapping tri-lobular bolt (1128269-00-A) then discard, If it is a normal bolt (1447438-00-A) it can be reused
Bolts (x4) that attach the hinges to the trunk lid	24 Nm (17.7 lbs-ft)	13 mm socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 23. Torque Specifications: Trunk (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the trunk harness ground strap to the trunk lid	8 Nm (5.9 lbs-ft)	10 mm socket Cordless Ratchet/Impact Driver Ratchet/torque wrench	Replace	Inspect bolt: if it is a self tapping tri-lobular bolt (1128269-00-A) then discard, If it is a normal bolt (1447438-00-A) it can be reused
Bolts (x4) that attach the hinges to the trunk lid	24 Nm (17.7 lbs-ft)	13 mm socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 24. Torque Specifications: Fender Assembly - Front - LH (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the upper LH front fender to the vehicle	9.8 Nm (7.2 lbs-ft)	10 mm deep socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse
Bolt that attaches the lower LH front fender to the vehicle	9.8 Nm (7.2 lbs-ft)	10 mm deep socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse
Bolt that attaches the rear LH front fender to the vehicle	9.8 Nm (7.2 lbs-ft)	10 mm deep socket 4 in extension Ratchet/torque wrench	Reuse
Bolt and nut that attach the lower LH front fender to the vehicle	9.8 Nm (7.2 lbs-ft)	10 mm deep socket 4 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 25. Torque Specifications: Door - Rear - LH (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH rear door check strap to the body	24 Nm (17.7 lbs-ft)	Cordless Ratchet/Impact Driver 4 in extension Torx T40 socket Ratchet/torque wrench	Reuse
Bolts (x4) that attach the LH rear door to the vehicle	24 Nm (17.7 lbs-ft)	10 mm socket Ratchet/torque wrench	Reuse

Table 26. Torque Specifications: Door - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x4) that attach the LH rear door to the vehicle	24 Nm (17.7 lbs-ft)	10 mm socket Ratchet/torque wrench	Reuse

Table 27. Torque Specifications: Temperature and Humidity Sensor (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x2) that attach the humidity and temperature sensor to the windshield bracket	0.12 Nm (1 lbs-in)	PH00 Philips Screwdriver Digital Torque Screwdriver 0.10Nm - 2.0Nm PH00 blade attachment	Reuse

Table 28. Torque Specifications: Bracket - Fascia Side to Fender - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the front fascia to the LH front fender	2.5 Nm (1.8 lbs-ft)	Cordless hex driver 8 mm magnetic deep 6 in nutsetter	Reuse
Nuts (x2) that attach the LH fascia side to fender bracket to the LH front fender	4 Nm (2.9 lbs-ft)	10 mm socket Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 29. Torque Specifications: Fascia - Rear - Lower (Performance) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x4) that attach the lower rear fascia to the upper rear fascia	3 Nm (2.2 lbs-ft)	10 mm socket Cordless Ratchet/Impact Driver	Reuse

Table 30. Torque Specifications: Fascia - Rear - Upper (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x4) that attach the lower rear fascia to the upper rear fascia	3 Nm (2.2 lbs-ft)	10 mm socket Cordless Ratchet/Impact Driver	Reuse
Bolts (x2) that attach rear fascia diffuser to the inside of the rear fascia	3 Nm (2.2 lbs-ft)	10 mm socket	Reuse
Bolts (x6) that attach the rear fascia diffuser to the outer edge of the rear fascia	10 Nm (7.4 lbs-ft)	10 mm socket	Reuse

Table 31. Torque Specifications: Cover - Front Fascia Camera (Remove and Replace) / Camera - Front Fascia (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x2) that attach the front fascia camera cover to the front fascia assembly	4 Nm (2.9 lbs-ft)	Torx T20 socket	Reuse
Screws (x2) that attach the front fascia camera to the cover	2 Nm (1.5 lbs-ft)	PH2 STUBBY PHILLIPS SCREWDRIVER	Reuse

Table 32. Torque Specifications: Fascia - Front (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x5) that attach the upper portion of the front fascia to the vehicle	3.5 Nm (2.6 lbs-ft)	Cordless hex driver 6 in nutsetter + 10 mm magnetic deep Torque wrench hexagon 1060071-00-A (for installation only)	Reuse
Bolts that attach the front fascia to the front fenders	2.5 Nm (1.8 lbs-ft)	Cordless hex driver 6 in nutsetter + 8 mm magnetic deep Torque wrench hexagon 1060071-00-A (for installation only)	Reuse
Bolts (x4) that attach the valance to the front aero shield panel	5 Nm (3.7 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm deep socket Torque wrench with angle measurement (for installation only)	Reuse