Torque Specifications - Closures
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolt that attaches the hood latch actuator to the front end carrier |
![]() 8 Nm (5.9 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the LH strut bracket to the body |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Screws that attach the hall sensor to the LH door exterior release handle |
![]() 1.2 Nm (.9 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Nuts that attach the exterior door handle to the door panel |
![]() 7 Nm (5.2 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the LH front upper door hinge to the door |
![]() 27 Nm (19.9 lbs-ft) |
|
Reuse | |
Bolts (x3) that attach the LH front upper door hinge to body |
![]() 27 Nm (19.9 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the LH front lower door hinge to the door |
![]() 27 Nm (19.9 lbs-ft) |
|
Reuse | |
Bolts (x2) that attach the LH front lower door hinge to body |
![]() 27 Nm (19.9 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the LH rear upper door hinge to the door |
![]() 27 Nm (19.9 lbs-ft) |
|
Reuse | |
Bolts (x2) that attach the LH rear upper door hinge to body |
![]() 27 Nm (19.9 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the LH rear lower door hinge to the door |
![]() 27 Nm (19.9 lbs-ft) |
|
Reuse | |
Bolts (x2) that attach the LH rear lower door hinge to body |
![]() 27 Nm (19.9 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the LH hood hinge to the body |
![]() 24 Nm (17.7 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Nuts (x2) that attach the power trunk hinge to the vehicle |
![]() 24 Nm (17.7 lbs-ft) |
|
Reuse | |
Bolts that attach the power trunk hinge to the trunk lid |
![]() 24 Nm (17.7 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the hood striker to the hood |
![]() 18 Nm (13.3 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the LH front door striker to the body |
![]() 26 Nm (19.2 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Nuts (x2) that attach the LH strut reinforcement to the hood |
![]() 15 Nm (11.1 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x4) that attach the front door speaker to the LH front door |
![]() 4 Nm (2.9 lbs-ft) |
|
Reuse | |
Bolt that attaches the LH front door check strap to the A-pillar |
![]() 24 Nm (17.7 lbs-ft) |
|
Reuse | |
Nuts (x2) that attach the check strap to the LH front door |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x4) that attach the front door speaker to the LH front door |
![]() 4 Nm (2.9 lbs-ft) |
|
Reuse | |
Screws (x5) that attach the LH front window motor to the LH front door closeout panel |
![]() 3 Nm (2.2 lbs-ft) |
|
Reuse | |
Screws (x8) that attach the LH front door closeout panel to the LH front door |
![]() 4 Nm (2.9 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x3) that attach the LH front door latch to the rear of the LH front door |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolt that attaches the LH rear door check strap to the body |
![]() 24 Nm (17.7 lbs-ft) |
|
Reuse | |
Nuts (x2) that attach the LH rear door check strap to the LH rear door |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the LH front window glass to the regulator isolator clamps |
![]() 9.5 Nm (7.0 lbs-ft) |
|
Reuse | |
Nuts (x2) that attach the LH front window regulator to the inner door |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach the LH rear window glass to the regulator isolator clamps |
![]() 9.5 Nm (7.0 lbs-ft) |
|
Reuse | |
Nuts (x2) that attach the LH rear window regulator to the closeout panel |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x3) that attach the LH rear door latch to the rear of the LH rear door |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x3) that attach trunk cinch latch assembly |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolt that attaches the LH front door check strap to the vehicle |
![]() 24 Nm (17.7 lbs-ft) |
|
Reuse | |
Nuts (x2) that attach the LH front door check strap to the door assembly |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts (x2) that attach trunk strike to vehicle body |
![]() 24 Nm (17.7 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Screws (x12) that attach the LH rear window motor/regulator assembly to the LH rear door |
![]() 4 Nm (2.9 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Nuts (x4) that attach the window regulator to the LH front door |
![]() 10 Nm (7.4 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Nuts (x3) that attach the exterior door handle to the door panel |
![]() 7 Nm (5.2 lbs-ft) |
|
Reuse |
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Screws (x2) that attach the sensor to the LH rear door exterior handle |
![]() 1.2 Nm (.9 lbs-ft) |
|
Reuse |