Carpet - Rear (Remove and Replace)
Correction code 1530020032 FRT 0.78 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the center console rear end panel. See Panel - Rear End - Center Console (Remove and Replace).
- Remove the LH and RH 2nd row seat side bolsters. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
- Remove the 2nd row lower seat cushion. See Seat Cushion - 2nd Row (Remove and Replace).
- Remove the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
- Remove the LH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
- Remove the LH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Remove and Replace).
- Remove the RH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
- Remove the RH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Remove and Replace).
- Disconnect LV power. See LV Battery - Li-lon (Disconnect and Connect).
- Remove the front passenger seat. See Seat Assembly - 1st Row - No Lumbar - RH (Remove and Replace).
- Remove the driver seat. See Seat Assembly - 1st Row - LH (Remove and Replace).
- Remove the push clips (x4) attach the rear main cabin carpet to the body.
- Remove the rear main cabin carpet from the vehicle.
Install
-
Install the rear main cabin carpet to the vehicle.
NoteSecure the rear carpet with the push clips (x4).
- Install the driver seat. See Seat Assembly - 1st Row - LH (Remove and Replace).
- Install the front passenger seat. See Seat Assembly - 1st Row - No Lumbar - RH (Remove and Replace).
- Connect LV power. See LV Battery - Li-lon (Disconnect and Connect).
- Install the RH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Remove and Replace).
- Install the RH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
- Install the LH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Remove and Replace).
- Install the LH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
- Install the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
- Install the 2nd row lower seat cushion. See Seat Cushion - 2nd Row (Remove and Replace).
- Install the LH and RH 2nd row seat side bolsters. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
- Install the center console rear end panel. See Panel - Rear End - Center Console (Remove and Replace).