Headliner (Remove and Replace)
Correction code
1520010012
FRT
1.08
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Torque Specifications
| Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
|---|---|---|---|---|
| Screw that attaches the LH rear coat hook to the body. |
 3.5 Nm (2.6 lbs-ft) |
|
Reuse |
Remove
- Remove the headliner assembly. See Headliner (Remove and Install).
Replace
- Install the headliner assembly. See Headliner (Remove and Install).
- Locally connect a laptop with Toolbox 3 to the vehicle. See Toolbox (Connect and Disconnect).
-
Select the
Actions
tab, search forTEST-SELF_VCLEFT_REAR-DOME-LIGHTS
, click on TEST-SELF_VCLEFT_REAR-DOME-LIGHTSvia Toolbox:(link), clickRun
, and allow the routine to complete. - Reinstall the firmware. See Software Reinstall - Touchscreen.
- Disconnect the laptop and exit Service Mode.