Escutcheon - Seat Belt - Center (Remove and Replace)
Correction code
1305020102
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure. See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Open the LH rear door and lower the LH rear window.
- Release the LH rear passenger seat back, and then fold the seat back down.
-
Release the clips (x4) that
attach the 2nd row center escutcheon to the seat assembly, and then separate
the trim from the seat belt.
Install
-
Install the 2nd row center
escutcheon onto the seat belt, and then install the clips (x4) that attach
the 2nd row center escutcheon to the seat assembly.
- Return the LH rear passenger seat back to its original position.
- Raise the LH rear window and close the LH rear door.