Bump Stop - Liftgate (Remove and Replace)
Correction code
1133070012
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure. See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Open the liftgate.
-
Rotate the LH liftgate bump
stop counter clockwise to remove it from the vehicle.
NoteCount the number of turns it takes to remove the bump stop.
Install
-
Install the bump stop to the vehicle using the same number of turns as
noted in the removal.
- Close the liftgate.
- Verify the flushness from the liftgate to the rear fascia assembly, and adjust as necessary.