Torque Specifications - Brakes

Table 1. Torque Specifications: Brake Rotor - Front - LH (Measure Runout)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front rotor to the knuckle
5 Nm (3.7 lbs-ft)
  • Cordless 1/4in Dr Ratchet
  • 2 in extension
  • 10 mm socket
  • Ratchet/torque wrench
Reuse
Nuts that secure the brake rotor run out clamping plate to the LH front rotor
100 Nm (73.7 lbs-ft)
  • Brake Rotor Run Out Kit - 1064697-00-B
  • Ratchet/torque wrench
  • 21 mm deep socket
  • Breaker bar
Reuse
Table 2. Torque Specifications: Brake Rotor - Rear - LH (Measure Runout)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front rotor to the hub
5 Nm (3.7 lbs-ft)
  • 2 in extension
  • 10 mm socket
  • Cordless 1/4in Dr Ratchet
  • Ratchet/torque wrench
Reuse
Nuts that secure the brake rotor run out clamping plate to the LH rear rotor
100 Nm (73.7 lbs-ft)
  • Brake Rotor Run Out Kit - 1064697-00-B
  • Ratchet/torque wrench
  • 21 mm deep socket
  • Breaker bar
Reuse
Table 3. Torque Specifications: Assembly - Brake Lines - Master Cylinder to HCU (LHD) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Nuts that attach the forward and rear brake line to the brake booster
16 Nm (11.8 lbs-ft)
  • 12mm 12pt combination wrench
  • ¼ in to 3/8 in adapter
  • 12 mm socket
  • Ratchet/torque wrench
Reuse
Master cylinder secondary pipe nut and primary pipe nut
16 Nm (11.8 lbs-ft)
  • 12 mm socket
  • ¼ in to 3/8 in adapter
  • 6 in extension
  • Ratchet/torque wrench
Reuse
Table 4. Torque Specifications: Jounce Hose - Rear Brake (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Nut at the jounce hose bracket
16 Nm (11.8 lbs-ft)
  • 3 in extension
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
Bolt that attaches the flexible brake hose to the brake caliper
42 Nm (31.0 lbs-ft)
  • Ratchet/torque wrench
  • 11 mm 12-point deep socket
Replace
Table 5. Torque SpecificationsJounce Hose - Front Brake - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Nut at the jounce hose bracket
16 Nm (11.8 lbs-ft)
  • ¼ in to 3/8 in adapter
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
Nut at the body
6 Nm (4.4 lbs-ft)
  • Ratchet/torque wrench
  • Cordless 1/4in Dr Ratchet
  • 10 mm deep socket
Reuse
Bolt that attaches the flexible brake hose to the brake knuckle
5 Nm (3.7 lbs-ft)
  • Ratchet/torque wrench
  • 10 mm deep socket
Reuse
Bolt that attaches the flexible brake hose to the brake caliper
42 Nm (31.0 lbs-ft)
  • Ratchet/torque wrench
  • 11 mm 12-point deep socket
Replace
Table 6. Torque Specifications: Junction Block - Brake Line (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
The RH rear brake line tube nut at the LH rear brake pipe junction block
16 Nm (11.8 lbs-ft)
  • 3 in extension
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
The LH rear brake line tube nut at the LH rear brake pipe junction block
16 Nm (11.8 lbs-ft)
  • 3 in extension
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
Nut that attaches the LH rear brake pipe junction block to the vehicle
5.5 Nm (4.1 lbs-ft)
  • 4 in extension
  • Ratchet/torque wrench
  • 10 mm socket
Reuse
Table 7. Torque Specifications: Brake Caliper - Rear (Base Brakes) - LH (Remove and Replace)
Bolt that attaches the LH rear EPB harness bracket to the LH rear caliper
5 Nm (3.7 lbs-ft)
  • 4 in extension
  • Ratchet/torque wrench
  • 10 mm socket
Reuse
Bolt that attaches the flexible brake hose to the brake caliper
42 Nm (31.0 lbs-ft)
  • Ratchet/torque wrench
  • 11 mm 12-point deep socket
Reuse
Nut at the jounce hose bracket
16 Nm (11.8 lbs-ft)
  • 3 in extension
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
Bolts (x2) that attach the LH rear caliper bracket to the knuckle
83 Nm (61.2 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 3 in extension
  • External Torx E18
  • Ratchet/torque wrench
Replace
Table 8. Torque Specifications: Assembly - Brake Lines - Rear - LH (Remove and Install)
Nut at the jounce hose bracket
16 Nm (11.8 lbs-ft)
  • 3 in extension
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
The LH rear brake line tube nut at the LH rear brake pipe junction block
16 Nm (11.8 lbs-ft)
  • 3 in extension
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
Table 9. Torque Specifications: Assembly - Brake Booster and Master Cylinder (LHD) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
LH bolt that secures the front harness bracket
9 Nm (6.6 lbs-ft)
  • 2 in extension
  • Ratchet/torque wrench
  • 10 mm socket
Reuse
Nuts that attach the forward and rear brake line to the brake booster
16 Nm (11.8 lbs-ft)
  • 12mm 12pt combination wrench
  • ¼ in to 3/8 in adapter
  • 12 mm socket
  • Ratchet/torque wrench
Reuse
Nuts that attach the booster to the bulkhead
16.5 Nm (12.2 lbs-ft)
  • Ratchet/torque wrench
  • 13 mm socket
  • 6 in extension
Replace
Table 10. Torque Specifications: Assembly - Brake Lines - Rear - RH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
RH rear brake line tube nut on the rear brake pipe junction block
16 Nm (11.8 lbs-ft)
  • 12 mm socket
  • Ratchet/torque wrench
  • ¼ in to 3/8 in adapter
Reuse
RH rear brake line tube nut on the RH rear brake hose
23 Nm (17.0 lbs-ft)
  • Ratchet/torque wrench
  • Flex head ratchet/flex head torque wrench
Reuse
Table 11. Torque Specifications: Assembly - Brake Lines - Front (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that secure the supermanifold to A/C line assembly to the HVAC assembly
22 Nm (16.2 lbs-ft)
  • 6 in extension
  • Cordless Ratchet/Impact Driver
  • 13 mm socket
  • Flex head ratchet/flex head torque wrench
Reuse
Bolts on the both sides of the shock tower brace
55 Nm (40.6 lbs-ft)
62 Nm (45.7 lbs-ft)
  • 15 mm deep socket
  • Cordless Ratchet/Impact Driver
  • Flex head ratchet/flex head torque wrench
Reuse
Nuts that attach the brake lines to the hydraulic control unit
16 Nm (11.8 lbs-ft)
  • 12 mm socket
  • Ratchet/torque wrench
  • ¼ in to 3/8 in adapter
Reuse
Bolts that secure the front harness ground terminal
8 Nm (5.9 lbs-ft)
  • 10 mm socket
  • Ratchet/torque wrench
  • 2 in extension
Reuse/Replace
Nut that attaches the LH front brake line to the LH front brake hose
16 Nm (11.8 lbs-ft)
  • 12 mm socket
  • Ratchet/torque wrench
  • ¼ in to 3/8 in adapter
Reuse
Nuts that attach the bottom side and the top side sill brake line tubes to the front brake pipe junction block
16 Nm (11.8 lbs-ft)
  • 12 mm socket
  • Ratchet/torque wrench
  • ¼ in to 3/8 in adapter
Reuse
Table 12. Torque Specifications: Sensor - Wheel Speed - Front - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front ABS wheel speed sensor to the knuckle
5 Nm (3.7 lbs-ft)
  • 10 mm deep socket
  • Flex head ratchet/flex head torque wrench
  • 4 in extension
Reuse
Table 13. Torque Specifications: Sensor - Wheel Speed - Rear - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear ABS wheel speed sensor to the knuckle
5 Nm (3.7 lbs-ft)
  • 10 mm socket
  • Flex head ratchet/flex head torque wrench
  • 4 in extension
Reuse
Table 14. Torque Specifications: Bracket - EPB Harness (Base Brakes) - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear EPB harness bracket to the LH rear caliper
5 Nm (3.7 lbs-ft)
  • 4 in extension
  • Ratchet/torque wrench
  • 10 mm socket
Reuse
Bolt that attaches the LH rear EPB harness bracket to the body
5 Nm (3.7 lbs-ft)
  • 10 mm socket
  • Ratchet/torque wrench
  • 4 in extension
Reuse
Table 15. Torque Specifications: Brake Shield - Front (Base Brakes) - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x3) that attach the LH front brake dust shield to the knuckle
8 Nm (5.9 lbs-ft)
  • Torx T30 socket
  • Cordless Ratchet/Impact Driver
  • 2 in extension
Reuse
Table 16. Torque Specifications: Brake Caliper - Front (Sport Brakes) - LH (Remove and Replace) Brake Caliper - Front (Sport Brakes) - RH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH/RH front brake hose bracket to the knuckle
5 Nm (3.7 lbs-ft)
  • Ratchet/torque wrench
  • 4 in extension
  • 10 mm socket
Reuse
Nut that attaches the LH/RH front brake line to the LH/RH front brake hose
16 Nm (11.8 lbs-ft)
  • ¼ in to 3/8 in adapter
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
Nut that attaches the LH/RH front brake hose to body
6 Nm (4.4 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse
Bolt that attaches the LH/RH front brake hose to the LH/RH front brake caliper
42 Nm (31.0 lbs-ft)
  • 11 mm deep socket
  • Ratchet/torque wrench
Replace Replace the fastener together with the brake hose.
Bolts (x2) that attach the LH/RH front brake caliper to the LH/RH front knuckle
94 Nm (69.3 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 3/8 in to ½ in adapter
  • External Torx E18
  • Breaker bar
  • Ratchet/torque wrench
Replace 1088969-00-B
Table 17. Torque Specifications: Brake Shield - Rear (Base Brakes) - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x3) that attach the LH rear brake dust shield to the knuckle
8 Nm (5.9 lbs-ft)
  • Torx T30 socket
  • Cordless Ratchet/Impact Driver
  • 4 in extension
  • Ratchet/torque wrench
Reuse
Table 18. Torque Specifications: Brake Rotor - Front (Base Brakes) - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front brake hose bracket to the LH front knuckle
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 4 in extension
  • 10 mm socket
  • Ratchet/torque wrench
Reuse
Bolts (x2) that attach the LH front brake caliper to the LH front knuckle
94 Nm (69.3 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • External Torx E18
  • Ratchet/torque wrench
Replace
Bolt that attaches the LH front brake rotor to the knuckle
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 2 in extension
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse
Table 19. Torque Specifications: Assembly - Brake Pedal (LHD) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt and the nuts (x4) that attach the brake pedal assembly to the vehicle Nuts
16.5 Nm (12.2 lbs-ft)
Bolt
13 Nm (9.6 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 13 mm deep socket
  • 4 in extension
  • Ratchet/torque wrench

Nut: Replace

Bolts: Reuse

Nut: 1111541-00-A
Table 20. Torque Specifications: Brake Rotor - Rear (Base Brakes) - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the LH rear brake caliper to the LH rear knuckle
83 Nm (61.2 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • External Torx E18
  • 3 in extension
  • Ratchet/torque wrench
Replace
Bolt that attaches the LH rear brake rotor to the hub
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 10 mm socket
  • 2 in extension
Reuse
Table 21. Torque Specifications: Clean And Lubricate Brake Calipers (Performance Brakes) (Requires Code 34012501) (Maintenance)
Bolts (x2) that attach the LH rear caliper bracket to the knuckle
83 Nm (61.2 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 3 in extension
  • External Torx E18
  • Ratchet/torque wrench
Replace Bolts: 1188643-00-C
Bolt that attaches the LH/RH front brake hose bracket to the knuckle
5 Nm (3.7 lbs-ft)
  • Ratchet/torque wrench
  • 4 in extension
  • 10 mm socket
Reuse
Bolts (x2) that attach the LH/RH front brake caliper to the LH/RH front knuckle
94 Nm (69.3 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 3/8 in to ½ in adapter
  • External Torx E18
  • Breaker bar
  • Ratchet/torque wrench
Replace 1088969-00-B
Table 22. Torque Specifications: Assembly - Brake Pedal (RHD) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt and the nuts (x4) that attach the brake pedal assembly to the vehicle Nuts
16.5 Nm (12.2 lbs-ft)
Bolt
13 Nm (9.6 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 13 mm deep socket
  • 4 in extension
  • Ratchet/torque wrench

Nut: Replace

Bolts: Reuse

Nut: 1111541-00-A
Table 23. Torque Specifications: Brake Pad Kit - Rear (Base Brakes) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x4) that attach the LH and RH rear brake caliper to the LH rear brake caliper bracket
26.5 Nm (19.5 lbs-ft)
  • 17mm 12pt combination wrench
  • 14 mm socket
  • Ratchet/torque wrench
Replace
Table 24. Torque Specifications: Brake Caliper - Rear (Sport Brakes) - LH (Remove and Replace)
Bolt that attaches the LH rear EPB harness bracket to the LH rear caliper
5 Nm (3.7 lbs-ft)
  • 4 in extension
  • Ratchet/torque wrench
  • 10 mm socket
Reuse
Bolt that attaches the LH rear brake hose to the brake caliper
42 Nm (31.0 lbs-ft)
  • Ratchet/torque wrench
  • 11 mm 12-point deep socket
Reuse
Nut at the jounce hose bracket
16 Nm (11.8 lbs-ft)
  • 3 in extension
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
Bolts (x2) that attach the LH rear caliper bracket to the knuckle
83 Nm (61.2 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 3 in extension
  • External Torx E18
  • Ratchet/torque wrench
Replace Bolts: 1188643-00-C
Table 25. Torque Specifications: Brake Caliper - Rear (Sport Brakes) - RH (Remove and Replace)
Bolt that attaches the RH rear EPB harness bracket to the LH rear caliper
5 Nm (3.7 lbs-ft)
  • 4 in extension
  • Ratchet/torque wrench
  • 10 mm socket
Reuse
Bolt that attaches the RH rear brake hose to the brake caliper
42 Nm (31.0 lbs-ft)
  • Ratchet/torque wrench
  • 11 mm 12-point deep socket
Reuse
Nut at the jounce hose bracket
16 Nm (11.8 lbs-ft)
  • 3 in extension
  • Ratchet/torque wrench
  • 12 mm socket
Reuse
Bolts (x2) that attach the RH rear caliper bracket to the knuckle
83 Nm (61.2 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 3 in extension
  • External Torx E18
  • Ratchet/torque wrench
Replace Bolts: 1188643-00-C
Table 26. Torque Specifications: Assembly - Brake Booster and Master Cylinder (RHD) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Nuts (x2) that attach the forward and rear brake lines to the brake booster
16 Nm (11.8 lbs-ft)
  • 12mm 12pt combination wrench
  • ¼ in to 3/8 in adapter
  • 12mm 3/8in Dr. Flare Nut Crowfoot Socket
  • Ratchet/torque wrench
Reuse
Nuts (x4) that attach the booster to the bulkhead
16.5 Nm (12.2 lbs-ft)
  • Ratchet/torque wrench
  • 13 mm 12-point deep socket
  • 6 in extension
Replace 1111541-00-A