Seal - Glass Run - Front Door - LH (Remove and Replace)
Correction code
1150010012
FRT
0.24
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
- Remove the LH front exterior mirror assembly from the LH front door. See Mirror - Door - LH (Remove and Replace).
-
Pull upwards to remove the LH front door glass run seal from the LH front door.
Install
-
Position the new LH front door glass run seal on the LH front door.
Tip: If necessary, apply a small amount of P80 lubricant on the length of the seal to aid installation.
- Install the LH front exterior mirror assembly to the LH front door. See Mirror - Door - LH (Remove and Replace).
- Install the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).