Drip Guard - Car Computer (Remove and Replace)
Correction code 2110022012 FRT 0.96 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the IP carrier. See IP Carrier (Remove and Install).
- Release the clips (x3) and remove the car computer drip guard from the vehicle.
Install
- Install the car computer drip guard to the vehicle.
- Install the IP carrier. See IP Carrier (Remove and Install).