Correction code3401000101FRT0.12NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
Lay wheel assembly face down
onto padded surface to gain access to the backside.
Remove wishbone aero wheel inserts.
Note
Use a hammer and punch to carefully release each
outboard clip securing wishbone aero insert onto wheel, push insert
downwards to remove wishbone aero insert from wheel assembly.
Install
Install wishbone aero wheel
inserts.
Note
Follow install press sequence for each wishbone
aero insert, align wishbone aero insert into inboard of wheel and push
insert in clockwise motion to snap into place, ensure all the clips are
fully engaged and secured onto wheel assembly.