Seal - Inner Belt - Front Door - LH (Remove and Replace)
Correction code 1170010032 FRT 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH front door reflector. See Reflector - Door - Front - LH (Remove and Replace).
- Remove the LH front door tweeter. See Tweeter - Front Door - LH (Remove and Replace).
- Remove the LH front door puddle light. See Puddle Lamp - Front Door (Remove and Replace).
- Remove the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
-
Release the clips (x3) that
attach the LH front door inner belt seal to the front door, and then pull up
to release the inner belt seal.
NoteRemove the clips that remain in the door, and then install the clips into the inner belt seal.WarningThe video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
Install
- Press the LH front door inner belt seal downwards into the LH front door.
- Install the clips (x3) that attach the inner belt seal to the LH front door.
- Install the LH front door puddle light. See Puddle Lamp - Front Door (Remove and Replace).
- Install the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
- Install the LH front door reflector. See Reflector - Door - Front - LH (Remove and Replace).
- Install the LH front door tweeter. See Tweeter - Front Door - LH (Remove and Replace).