17/10/2023 18:50:09

Pivot Cover - Seat Back - 2nd Row (Remove and Replace)

Correction code 1305010012 FRT 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the 2nd row LH seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  2. Remove the 2nd row RH seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  3. Remove the 2nd row lower seat cushion. See Seat Cushion - 2nd Row (Remove and Replace).
  4. Remove the 2nd row LH seat back assembly. See Seatback - 2nd Row - LH (Remove and Replace).
  5. Remove the 2nd row RH seat back assembly. See Seatback - 2nd Row - RH (Remove and Replace).
  6. Remove the 2nd row seat back pivot cover from the vehicle.
    Tip: Move the pivot cover slightly towards the left side first and then release it from the pivot.

Install

  1. Install the 2nd row seat back pivot cover to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the pivot cover is installed in place.
  2. Install the 2nd row RH seat back assembly. See Seatback - 2nd Row - RH (Remove and Replace).
  3. Install the 2nd row LH seat back assembly. See Seatback - 2nd Row - LH (Remove and Replace).
  4. Install the 2nd row lower seat cushion. See Seat Cushion - 2nd Row (Remove and Replace).
  5. Install the 2nd row RH seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).
  6. Install the 2nd row LH seat side bolster. See Bolster - Side - Seat - 2nd Row - LH (Remove and Replace).