17/10/2023 18:51:49

Visor Check - Magnetic (Remove and Replace)

Correction code 1520010032 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Rotate the LH sun visor away from the check base.
  2. Use a pry tool to release the 2 tabs that attach the check base to the headliner.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
    Tip: Use a non-marring tool to remove the LH magnetic visor check base from the headliner.
  3. Remove the check base from the headliner.

Install

  1. Install the tabs (x2) that attach the LH magnetic visor check base to the headliner.
  2. Attach the LH sun visor to the check base.