Stone Guard (Remove and Replace)
Correction code
18200332
FRT
1.08
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how
they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection
to make sure wearing proper PPE when performing the below procedure.
NOTE: See Ergonomic Precautions for safe and
healthy working practices.
- 2025-12-29: Released new procedure.
Remove
- Remove the radiator. See Radiator (Remove and Replace).
-
Remove the thermal foam strips (x3) from the radiator.
-
Release the clips that attach the stone guard to the radiator, and then slide the
stone guard out to remove it from the radiator.
Install
-
Align the tabs of the stone guard with
the guide datums, and then install the clips that attach the stone guard to the
radiator.
-
Install the thermal foam strips (x3) onto the radiator.
- Install the radiator. See Radiator (Remove and Replace).