17/10/2023 18:48:45

Gas Strut - Hood (Remove and Replace)

Correction code 1133030062 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 1080562-00-A Telescoping Hood Prop

Remove

  1. Open the hood.
  2. Use a prop to attach the hood assembly in the open position.
  3. Release the clip that attaches the hood gas strut to the hood mount.
  4. Release the clip that attaches the hood gas strut to the body mount, and then remove the hood gas strut from the vehicle.

Install

  1. Lubricate the pivot points for the hood gas strut.
  2. The rod end of the hood gas strut mounts to the body and the body side of the hood gas strut mounts to the hood assembly.
  3. Install the clip that attaches the hood gas strut to the body mount, and then install the hood gas strut to the vehicle.
  4. Install the clip that attaches the hood gas strut to the hood mount.
  5. Remove the hood assembly prop from the vehicle.
  6. Close the hood.