Cover - Footwell - Front Passenger (Remove and Replace)
Correction code
1405010062
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure. See Ergonomic Precautions for safe and healthy
working practices.
- 2024-07-25: Added steps for NA vehicles.
Remove
- Open the RH front door and lower the RH front window.
- Move the RH front seat backward.
-
Release the passenger footwell cover from the vehicle.
- For APAC and EMEA vehicles: Release the clips that attach the passenger footwell cover to the vehicle.
- For NA vehicles: Release the magnets (x2) that attach the passenger footwell cover to the vehicle.
Figure 1. Passenger Footwell Cover on APAC and EMEA Vehicles Figure 2. Passenger Footwell Cover on NA Vehicles -
Disconnect the electrical
connector from the puddle light, and then remove the footwell cover from the
vehicle.
Install
-
Connect the electrical
connector to the puddle light, and then install the footwell cover to the
vehicle.
-
Install the passenger footwell cover to the vehicle.
- For APAC and EMEA vehicles: Secure the clips that attach the passenger footwell cover to the vehicle.
- For NA vehicles: Secure the magnets (x2) that attach the passenger footwell cover to the vehicle.
Figure 3. Passenger Footwell Cover on APAC and EMEA Vehicles Figure 4. Passenger Footwell Cover on NA Vehicles - Move the RH front seat to original position.
- Raise the RH front window and close the RH front door.