Key Card (Remove and Replace)
Correction code 1745010022 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
- 2024-06-17: Added picture to display how to pair the new key card.
Adding an Additional Key Card
- On the touchscreen, touch Controls > Locks, and then touch + in the "Keys" section.
- Scan the new key card on the key reader behind the cup holders on the top of the center console. After the new key card or key fob is recognized, remove it from the key reader.
- Scan an already-authenticated (i.e. already has access to the vehicle) key card on the key reader behind the cup holders on the top of the center console.
-
When complete, the key list on the touchscreen displays the newly authenticated key.
NoteYou can customize the name of the key by touching the associated pencil icon.
- Tap the new key against the driver's side B-pillar applique to verify that the key locks and unlocks the vehicle.
- Place the new key card near the card reader located in the wireless phone charger on the center console to verify it is authenticated and can start the vehicle.