17/09/2024 02:30:56

TPMS (Sensor ID Drive Learn)

Correction code 34041150 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Procedure

  1. Enable Service Mode through the touchscreen. See Service Mode.
  2. Unlock the vehicle gateway for diagnostic communication. See Gateway Unlock.
  3. On the vehicle touchscreen, touch Chassis > TMPS.
  4. Touch the green button and select Erase All TPMS IDs.
  5. Confirm that all TPMS IDs are erased.
  6. Touch Service Mode > Service Settings > Remove Speed Limit.
  7. Drive the vehicle over 25 kph / 15 mph to pair the TPMS sensors.
  8. On the vehicle touchscreen, touch Chassis > TMPS.
  9. Confirm that all TPMS sensors are connected.
  10. Exit Service Mode.