Support Bracket - Display - LH (Remove and Replace)
Correction code
1405020032
FRT
0.90
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the IP carrier. See IP Carrier (Remove and Replace).
-
Remove the screws (x2) that
attach the LH center display bracket, and then remove the bracket from the
vehicle.
Install
-
Install the screws (x2) that
attach the LH center display bracket, and then install the bracket to the
vehicle.
2.3 Nm (1.7 lbs-ft)
- Install the IP carrier. See IP Carrier (Remove and Replace).