Seal - Probe Lid - Ancillary Bay Cover (Remove and Replace)
Correction code 1630010212 FRT 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the HV battery probe cover. See Probe Lid - Ancillary Bay Cover (Remove and Replace).
- Remove the HV battery probe cover seal.
Install
- Install the HV battery probe cover seal.
- Install the HV battery probe cover. See Probe Lid - Ancillary Bay Cover (Remove and Replace).