Cap - Coolant Reservoir (Remove and Replace)
Correction code
1840010152
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
-
Remove the coolant bottle
cap from the coolant bottle assembly.
CAUTIONWear appropriate personal protective equipment (PPE) when performing this operation.
Install
-
Install the coolant bottle
cap to the coolant bottle assembly.
- Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).