17/10/2023 18:50:07

2nd Row Seat Back Hardware -2nd Row Seatback Handle Assembly - LH (Remove and Replace)

Correction code 1305020082 FRT 0.66 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the LH 2nd row seat side bolster. See 2nd Row Seat Assemblies -2nd Row Bolster - LH (Remove and Replace).
  2. Remove the 2nd row lower seat cushion. See 2nd Row Seat Assemblies -2nd Row Seat Cushion (Remove and Replace).
  3. Remove the 2nd row LH seat back hinge bracket. See 2nd Row Seat Back Hardware -2nd Row Seatback Hinge Bracket Assembly - LH (Remove and Replace).
  4. Remove the 2nd row LH seat back handle bezel. See 2nd Row Seat Back Hardware -2nd Row Seatback Handle Bezel - LH (Remove and Replace).
  5. Remove the 2nd row LH seat back center escutcheon. See 2nd Row Seat Back Hardware -2nd Row Seatback Center Escutcheon (Remove and Replace).
  6. Remove the center armrest assembly. See 2nd Row Seat Assemblies -2nd Row Armrest System (Remove and Replace).
  7. Remove the 2nd row LH seat back trim and foam assembly. See 2nd Row Seat Covers And Pads -2nd Row Seat Back Trim, LH (Remove and Replace).
  8. Remove the 2nd row center seat back escutcheon support. See 2nd Row Seat Back Hardware -2nd Row Seatback Center Escutcheon Support (Remove and Replace)
  9. Remove the 2nd row LH seat back handle assembly cable from the seat back latch bracket assembly with a clip prytool.
    Informational PurposesAn informational icon, calling your attention
    Note
    Release the clips that attach the handle assembly cable to the seat back latch bracket in the sepuence and direction as the arrows show.
  10. Release the clip that attaches the handle cable to the seat frame, and then remove the 2nd row LH seat back handle assembly from the seat frame.

Install

  1. Secure the clip that attches the 2nd row LH seat back handle assembly to the seat frame.
  2. Install the 2nd row LH seat back handle assembly to the seat frame.
    Informational PurposesAn informational icon, calling your attention
    Note
    Install the clips that attach the handle assembly cable to the seat back latch bracket in the sepuence and direction as the arrows show.
  3. Remove the 2nd row center seat back escutcheon support. See 2nd Row Seat Back Hardware -2nd Row Seatback Center Escutcheon Support (Remove and Replace)
  4. Remove the 2nd row LH seat back trim and foam assembly. See 2nd Row Seat Covers And Pads -2nd Row Seat Back Trim, LH (Remove and Replace).
  5. Remove the center armrest assembly. See 2nd Row Seat Assemblies -2nd Row Armrest System (Remove and Replace).
  6. Remove the 2nd row LH seat back center escutcheon. See 2nd Row Seat Back Hardware -2nd Row Seatback Center Escutcheon (Remove and Replace).
  7. Remove the 2nd row LH seat back handle bezel. See 2nd Row Seat Back Hardware -2nd Row Seatback Handle Bezel - LH (Remove and Replace).
  8. Remove the 2nd row LH seat back hinge bracket. See 2nd Row Seat Back Hardware -2nd Row Seatback Hinge Bracket Assembly - LH (Remove and Replace).
  9. Remove the 2nd row lower seat cushion. See 2nd Row Seat Assemblies -2nd Row Seat Cushion (Remove and Replace).
  10. Remove the LH 2nd row seat side bolster. See 2nd Row Seat Assemblies -2nd Row Bolster - LH (Remove and Replace).