17/10/2023 18:50:57
Cover - Latch - Trunk (Remove and Replace)
Correction code
1511010062
FRT
0.06
NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the trunk lid trim. See Trim - Lid - Trunk (Remove and Replace).
-
Insert a small flat head
screwdriver between the latch and latch cover, and then gently pry the latch
cover away from the latch.
Install
-
Install the latch cover to the latch and make sure the tab engaged.
- Install the trunk lid trim. See Trim - Lid - Trunk (Remove and Replace).