Camera Cover - Lower (Remove and Replace)
Correction code
1505010032
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure. See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Open the LH front door and lower the LH front window.
-
Use a trim tool to remove
the lower camera cover.
WarningThe video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
-
Depress the tabs (x2) to
remove the tether from the lower camera cover, and then remove the lower
quad camera cover.
Install
-
Install the tether onto lower camera cover.
-
Install the lower camera cover.
NoteInstall the tabs closest to the rear view mirror assembly and push the cover up to secure.
- Raise the LH front window and close the LH front door.