Panel - Rear End - Center Console (Remove and Replace)
Correction code
1519010042
FRT
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure. See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Open all doors and fully lower all windows.
- Move the LH and RH front seat forward.
-
Remove the clips (x6) and tabs (x2) that attach the center console end
panel to the console, and then remove the end panel form the console.
NoteRelease the upper clips first, and then work toward to release the lower tabs.
Install
-
Install the clips (x6) and tabs (x2) that attach the center console end
panel to the console.
NoteFasten the lower tabs first, and then work toward to fasten the upper clips.
- Move the LH and RH front seat back to their original positions.
- Raise all the windows and close all the doors.